Sortaflush Part Duex

[Mr_Chunkz]

Hey guys
I ordered some spacers for my TSX and during my short vacation decided to mess around with them to see how different offsets would affect the look of the car. I came up with a combination that I'm pretty happy with for show/meet/pics.. but can't roll it daily because it rubs everywhere.

+15mm spacer rear
+5mm spacer front

With these spacers the effective wheel size goes to
19x8.5 +30 front
19x8.5 +20 rear
Tires are FK452 215/35/19

The camber is stock ( no camber kit )
Suspension is Tein Basic full low.

Sorry for the crappy pics... my Point and shoot is old and dying. Also, these pics are pretty boring if you saw my last post....

But first... a fun lil pic of my car on a jack when the camber is neutralized

I thought for sure this wasn't going to work


But it did...










SORTAflush Yo!


Still tire tuckin

This fitment is as aggressive as I dare go on a daily driven car with 19s. With 18s and more stretch I'd be braver, but this suits me just fine for now.

Completely unrelated, I also recently got Reflashed and dynoed....

I'm 5AT with Injen intake and Hondata Reflash. I thought the numbers weren't to shabby for the minimal mods that I have....

Oh and before I get shut down again... I realize I'm not milton flush approved..... but the car is still somewhat drivable day to day still!
I'd be much more aggressive with air, but these are just coils.

[Toy1mzfe]

look much better than before. thats better stance yo!

[ToyoSolV6]

Looks good Tracy! now get the solara back and make it look like that

[SleeperSolara]

Looks good Tracy.

[yaddadaimsayin]

looks like it'd rub like a bitch. i'm liking the "sorta flush" decal. haha!

[---CAMRAZY---]

Are you going to get a kit on it? Just wondering... Looks better too..

[Mr_Chunkz]

Looks good Tracy! now get the solara back and make it look like that

Haha yes. I am getting some retarded ideas for the lara, and because its not my daily I can get aggressive with fitment and possibly even be miltflush approved with it.
=]

[Mr_Chunkz]

Are you going to get a kit on it? Just wondering... Looks better too..

I really want to get a euro r lip kit but im limited on budget...plus id kill for some of those special run 5x114.3 work brombacher wheels. But I want to finish my lara first

Thanks for the semi kind words pops lol

[CamryOnBronze]

Looking pretty good Tracy! Did you roll the fenders? You should just rock it!

[Mr_Chunkz]

Looking pretty good Tracy! Did you roll the fenders? You should just rock it!

Yeah, the fenders are rolled in the front with a slight pull
Because of the way the bumper mounts to the rear fender, I chose to cut off the inner lip of the fender on the rear and hammer in the mounting tab for the bumper. Also, on all 4 corners, the fender lining is cut away to allow the tires to tuck over large bumps and driveways.

[Mr_Chunkz]

A few new shots, during the day cause my camera takes shi.t nighttime photos.






Yeah there's still a little room to spare... its my daily yo!

Sorry for the sunlight glare...




This posting is Domo flush approved =]



And now... HAVE A LOOK AT MY KNOB










Shift knob that is.
Got this Razo knob on the cheap. Sits low and feels good. Question is, should I retrofit a boot under it or leave it as is?

[Toy1mzfe]

leave it as is with the knob man. Boot might look a lil tacky. Kinda like the gear selector slots.

Looking real nice slammed.

[i20solara02i]

nice =)

[ToyoSolV6]

looks sick Tracy!