More LED Light Madness

[Mr_Chunkz]

Thanks to Greg for taking my interior lighting to a new level of idiocy.
I had to put all these on a kill switch for night driving cause it blinds me...




All footwells now LED lit




Cupholder LED Lit




Close Up of Cupholder


Drilled 2 small holes in the center of the cup holders that was just smaller than the bulb head, so it won't go all the way through, then wrapped the bulb head in plastic wrap to keep water from seeping in.
Bulbs: Super High Power 1 Watt Super-Charged LED Bulb
http://autolumination.com/74.htm

Autolumination Provided Image


Drilled A hole in the back of cubby, just shy of 3/4 Inch to fit this #194 Bulb and socket ( dont mind the hole at the top right, it was a mess up )
Bulb: 5 LED SMT Tower
http://autolumination.com/194.htm

Autolumination Provided Image


Driver footwell, drilled 2 holes just shy of 3/4 inch to fit these #194 Bulbs and sockets
Bulbs: 25 LED SMT Tower III

Autolumination Provided Image


Glovebox = Drilled 2 holes just shy of 3/4 inch on top most part of glovebox to fit these #194 bulbs and sockets
Bulb: 5 LED SMT Tower
http://autolumination.com/194.htm

Autolumination Provided Image


The glovebox at night time


Passenger footwell, drilled 2 holes just shy of 3/4 inch to fit these #194 Bulbs and sockets
Bulbs: 25 LED SMT Tower III

Autolumination Provided Image



Rear lights, tucked.




Under this cloth bit that hangs on top of each seat rail you can shove a 194 bulb in, and along the side there are 2 cloth covered seat components which meet. We used these to run the wiring so none of it shows.


The bulb, under the cloth, wedged in there.
Bulbs: 25 LED SMT Tower III

Autolumination Provided Image


All #194 bulbs were plugged in using this pigtail socket

Autolumination Provided Image
194 Bulb Connector Part 60-58

Closeup Shots, mounted in holes

The plugs pop right in after drilling holes that were just under 3/4 inch. The "teeth" grabbed pretty hard, and they don't pop out.

Bulb plugs right in

Both #74 bulbs were plugged in using this pigtail socket

Autolumination provided image
74 Twist Pigtail Sockets
Because the cupholder LEDs are held in via hole sizing, this connector was not mounted, but left to dangle under cupholder.

[DSM_Lara]

Now you'll never loose something that you drop in the car at night. O yay, I thought your interior was black but, with all that lighting I was wrong.

[stringbean]

thats just ridiculous! NUTTY! clean job though! i like it! I want it!!! lol

[Akfahad]

that's tits....must've taken some time.....so how much have you spent in LEDs now?

[Ruski]

Damn Boy, talk about illumination youll never loss a thing, looks clean though.... Im the opposite i turned off all my interior lights i cant stand getting into a bright car at night . but thats just me

[Black Bob]

Hey Chunkz! Did you know your car was captured on Google Maps?

[Ruski]

Bwahhhahhaa

[NXRACER]

LOL .... "ITS DEM ALIENS, THERRR COMIN"

great job tho, i could use 3 of em especially because my dome light doesnt work.. not bad in town but it suck to need a flashlight to get in your car when in the open dark desert, i have to put the key in by 20 seconds b4 the green circle dissappears

[Toy1mzfe]

Nice im planning on doing to same but with some smaller bulbs. Thats a bit too hot and heavy for me. hah.

.make sure nobody kick them smd towers.

[stringbean]

You know it came to me last night, if jesus was to return he'd arrive in your car so when he got out he would be illuminated perfectly by your lights!

[SleeperSolara]

Hell yeah Tracy.
I've been wantin' to do that for my cup holders.

[NXRACER]

ok this tops it ALL !
custom angel-eye headlight mod HERE

[mightymouse402]

Thats a bit too hot and heavy for me.

That's what she said...




Damn Tracy that's effing crazy, I was thinking about doing the same thing to my car but in red and nowhere near that level. haha. Looks really clean though.

[solara90]

ha damn. i really like the cup holder lights!