[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - Removing door jamb protector?
How to, DIY, and Get 'er done.

Removing door jamb protector?

Removing door jamb protector?

Postby GregSolara » Tue Jan 21, 2014 5:07 pm

Hey everyone. I recently bought some new old stock parts for my solara and I decided to do a full detail. Clay bar, glaze, polish, wax, etc. One of the things I bought were some new door jamb protectors-the clear film that goes on the door sill. The ones I have on the car now are moldy and nasty. I have no idea how to get it off. I tried peeling it but the adhesive is so strong I can't pull it off. I don't want to use a razor because I will probably damage the paint underneath. Help please
GregSolara
Just Licensed SolaraGuy
 
Posts: 27
Joined: Sat Aug 04, 2012 7:43 pm

Re: Removing door jamb protector?

Postby 1gSE » Tue Jan 21, 2014 5:14 pm

try a heat gun
Image
GTO-Vararam/Kooks/Spintech/MGW-P/Tune-12.9 @108
Solara-M62 @ 5.5psi
User avatar
1gSE
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2050
Joined: Wed Apr 11, 2007 8:37 pm
Location: Abilene, TX

Return to Tutorials

Who is online

Users browsing this forum: No registered users and 2 guests