[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - need help identify this connector under the dash 1994 v6 cam

SolaraGuy.com

Drive faster, live longer.
http://www.solaraguy.com/

need help identify this connector under the dash 1994 v6 cam

http://www.solaraguy.com/viewtopic.php?f=4&t=49826

Page 1 of 1

need help identify this connector under the dash 1994 v6 cam

PostPosted: Sat Jul 17, 2010 10:29 am
by lemegacool
copy/paste from TN

hi!

well i'm about to do a 5 speed swap and i want to know what does this plug does? like is it a cruise control related plug that i should plug on the clutch switch?

its a 1 pin plug situated like right over where the clutch pedal should be... any ideas of whats the purpose of this plug?

thanks!


Image

Re: need help identify this connector under the dash 1994 v6

PostPosted: Thu Jul 29, 2010 8:56 pm
by lemegacool
nevermind i found it... its P2 connector "parking brake switch" used with the pedal parking brake witch i dont have!

the cruise control clutch switch is connector C15... dont think i have this one since i have an auto harness... damn... now i need to find out what pin on the cruise ecu to use to jam my cruise clucth sw in...

Re: need help identify this connector under the dash 1994 v6

PostPosted: Fri Jul 30, 2010 3:30 am
by DSM_Lara
Wow.. hears like your almost there? or just starting.... anyways good luck with the swap.

Re: need help identify this connector under the dash 1994 v6

PostPosted: Fri Jul 30, 2010 5:18 am
by lemegacool
thanks!

i'm figuring out my wiring before i start putting thins in the car!
All times are UTC - 8 hours [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/