pre '97 MAF to '97 & newer MAF conversion?
I have a '95 Avalon ECU and MAF sensor in my car and it has the pre ’97 MAF sensor integrated into a piece of tube that plugs into the air filter box and is very restrictive. I want to switch to the ’97 and newer “standalone” MAF sensor so I can put it into a larger tube, but there is 1 pin different between the 2 MAF sensors. I was wandering if anyone has figured a (inexpensive) way to convert to the newer MAF sensor?
The pin difference is the ’95 has an “VG-” and the ’97 and new has a “E2G“. I have an ’02 MAF that I already tried connecting to my ECU and the car would start but not stay running. I haven’t compared all the pins from my ECU to a ’97 yet, but really don’t want to buy a different ECU unless I have to.
Thanks
The pin difference is the ’95 has an “VG-” and the ’97 and new has a “E2G“. I have an ’02 MAF that I already tried connecting to my ECU and the car would start but not stay running. I haven’t compared all the pins from my ECU to a ’97 yet, but really don’t want to buy a different ECU unless I have to.
Thanks
Last edited by V6Celi on Thu May 28, 2009 10:18 pm, edited 1 time in total.
Jim
'88 Celica w/ '02 Camry 1MZ-FE & '00 5 speed trans
'88 Celica w/ '02 Camry 1MZ-FE & '00 5 speed trans
- V6Celi
- Just Licensed SolaraGuy
- Posts: 8
- Joined: Thu May 28, 2009 3:59 pm