The rebirth of the Wraith...
by Wraith » Sat Nov 20, 2004 9:27 am
This is a repost from ToyotaNation.com
Yes it time... November 13th shes going into the surgery room to be reborn... The shop thats doing it is http://www.GTFabrications.com ... I hope that she'll be put together by early December and running with full power sometime in January, with just enough time for California Speedway. I will be doing some night runs in Palmdale. And run Irwindale to learn to launch the car with the 2step and learn to control the car when she on boost and juice after 2nd gear.
I will be posting videos soon from build up to finish, dynos, 1/8th mile and 1/4mile runs... I will be requiring the services of Yukio Taira aka "CamryPunker" and his super video filming and editing skillz.
I'll keep you guys posted... Expect 12's,11's, and low 10's sec barriers to be broken... Next year...
Finally List of Mods:
-2.1Liter Long Rod 5S-GTE hybird motor
-HKS 272 Cams Hi lift from Japan
-Custom ChrisK intake manifold with 75mm bbk throttle body
-Custom GT4088R with 0.84 a/r housing
-Full Race Full Race Turbo Manifold with custom wastegate pipe.
-Tilton Twin Plate Carbon on Carbon clutch
-HKS 60mm GTII wastegate
-twin Greddy Typoe R bov
- ATP inconel shielding for header box, downpipe, intercooler pipes, radiator pipes, and intake manifold.
-Custom Stage 6Drive Shaft Shop Chrom Moly axles and hubs
-Spearco Dual Core Liquid to air intercooler
-AEM standalone unit with wideband and cdi-2 tuned by
TorqueFreaks.com
-4 inidividual MSD HVCII coils
-Dual Bosch 90gal@100psi fuel pumps
-NX Pirahana nitrious kit with remote bottle openner and purge valves
-Custom billet/poly urtheane motor mounts
-Koyo S13 SR20DET Radiator
-KAAZ 1.5way lsd
-SX fuel pressure regulator
- 4 - Hi Flow/ Hi pressure Bosch 160lb injectors
-5s-fe fuel rail
-Burns Stainless Light weight muffler
-Custom 2.5" intercooler piping
-Custom 3" to 3.5" to 4" down pipe
-Custom 4" exhaust piping
-Custom 4" oval piping for underneath the car
pretty much it ... well, what I got off the top of my head..
I finally go a few stuff I have ordered... still waiting on a few other parts...
Heres pics of my Greddy Type R bov
Heres a couple of shots of my 60mm HKS GT-II wastegate
heres a couple of shots of my Full Race manifold still not complete still need to be modified to fit my setup better.
Yes it time... November 13th shes going into the surgery room to be reborn... The shop thats doing it is http://www.GTFabrications.com ... I hope that she'll be put together by early December and running with full power sometime in January, with just enough time for California Speedway. I will be doing some night runs in Palmdale. And run Irwindale to learn to launch the car with the 2step and learn to control the car when she on boost and juice after 2nd gear.
I will be posting videos soon from build up to finish, dynos, 1/8th mile and 1/4mile runs... I will be requiring the services of Yukio Taira aka "CamryPunker" and his super video filming and editing skillz.
I'll keep you guys posted... Expect 12's,11's, and low 10's sec barriers to be broken... Next year...
Finally List of Mods:
-2.1Liter Long Rod 5S-GTE hybird motor
-HKS 272 Cams Hi lift from Japan
-Custom ChrisK intake manifold with 75mm bbk throttle body
-Custom GT4088R with 0.84 a/r housing
-Full Race Full Race Turbo Manifold with custom wastegate pipe.
-Tilton Twin Plate Carbon on Carbon clutch
-HKS 60mm GTII wastegate
-twin Greddy Typoe R bov
- ATP inconel shielding for header box, downpipe, intercooler pipes, radiator pipes, and intake manifold.
-Custom Stage 6Drive Shaft Shop Chrom Moly axles and hubs
-Spearco Dual Core Liquid to air intercooler
-AEM standalone unit with wideband and cdi-2 tuned by
TorqueFreaks.com
-4 inidividual MSD HVCII coils
-Dual Bosch 90gal@100psi fuel pumps
-NX Pirahana nitrious kit with remote bottle openner and purge valves
-Custom billet/poly urtheane motor mounts
-Koyo S13 SR20DET Radiator
-KAAZ 1.5way lsd
-SX fuel pressure regulator
- 4 - Hi Flow/ Hi pressure Bosch 160lb injectors
-5s-fe fuel rail
-Burns Stainless Light weight muffler
-Custom 2.5" intercooler piping
-Custom 3" to 3.5" to 4" down pipe
-Custom 4" exhaust piping
-Custom 4" oval piping for underneath the car
pretty much it ... well, what I got off the top of my head..
I finally go a few stuff I have ordered... still waiting on a few other parts...
Heres pics of my Greddy Type R bov
Heres a couple of shots of my 60mm HKS GT-II wastegate
heres a couple of shots of my Full Race manifold still not complete still need to be modified to fit my setup better.
to View photo album
screen name:guestvisitor
password: pass
THEWraith Pics
MySpace:
http://www.myspace.com/335453
screen name:guestvisitor
password: pass
THEWraith Pics
MySpace:
http://www.myspace.com/335453
- Wraith
- Regular SolaraGuy Member
- Posts: 58
- Joined: Thu Nov 18, 2004 3:10 pm
- Location: Wrecking Havoc in your nightmares
