(Help?..) Stock JBL Amp and headunit Removal/Replacement
Hey guys! - I searched earlier but had no success so..
Question is: Removal of OEM JBL Amplifier and Headunit
I'm fairly new to this area of audio work, and am very interested in learning how to properly replace these components! The required dash pieces have been removed, dash kit acquired, wire harness (I believe to be correct) also in possession.
Wire Harness:

Pioneer AVH-4200DVD (2010 model) - Relay to allow DVD playback while driving already wired.

Removed the glove box and located two "amp"-like units, left is clearly marked as the car's computer drive system and I'm assuming the far right is the actual JBL amplifier.. with a glance at the wires and how they are intertwined with the car's CPU harness, I'm wondering if this is something a novice should attempt in continuing.
I have previous experience in wiring amps/subs/speakers..but never replacing a factory radio. Seems like I've browsed 20+ posts referencing the stock JBL units in the Gen 2's and have run out of patience
Judging by the responses Crisp (amongst others) has received on his previous post I know there are some very experienced members around, so if someone could lead me in the right direction it'd be much appreciated!
My experience is limited but I do feel comfortable in tackling this with a bit of help.
Hell.. for all I know this is a simple matter of disconnecting the stock amp, capping all ends and proceeding along my way.
Thanks ahead of time for any pointers
Question is: Removal of OEM JBL Amplifier and Headunit
I'm fairly new to this area of audio work, and am very interested in learning how to properly replace these components! The required dash pieces have been removed, dash kit acquired, wire harness (I believe to be correct) also in possession.
Wire Harness:

Pioneer AVH-4200DVD (2010 model) - Relay to allow DVD playback while driving already wired.

Removed the glove box and located two "amp"-like units, left is clearly marked as the car's computer drive system and I'm assuming the far right is the actual JBL amplifier.. with a glance at the wires and how they are intertwined with the car's CPU harness, I'm wondering if this is something a novice should attempt in continuing.
I have previous experience in wiring amps/subs/speakers..but never replacing a factory radio. Seems like I've browsed 20+ posts referencing the stock JBL units in the Gen 2's and have run out of patience
Judging by the responses Crisp (amongst others) has received on his previous post I know there are some very experienced members around, so if someone could lead me in the right direction it'd be much appreciated!
My experience is limited but I do feel comfortable in tackling this with a bit of help.
Hell.. for all I know this is a simple matter of disconnecting the stock amp, capping all ends and proceeding along my way.
Thanks ahead of time for any pointers

-
DV8 - Just Licensed SolaraGuy
- Posts: 39
- Joined: Wed May 27, 2009 12:00 am
- Location: Convoy, OH