[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - System install - After the fire
Page 1 of 2

System install - After the fire

PostPosted: Fri Jan 09, 2009 4:20 pm
by Solara08861
As everyone knows I had a small car fire and it damage some of my system.
The past system was a bit to crazy so I'm going to tune it down and make it a more simple set up.
All 4 10 inch mid-bass woofers were damaged.

Here is the componets of the new system.
The front speakers are staying the same
6x9 Infinity Kappas and a set of bullet tweeters.

Rear deck
We are making a custom rear deck out mdf
2 8 inch Beyma PRO 8MI Mid-Bass a set of BEYMA AST22 tweeters
Image
Image

Sub
1 RF T2 in a custom built box

Amps
1 RF T1000 for the Sub
Image
1 RF T8004 for front and rear
Image

The sub will be facing the back seat. When I bring the seat down you will be able to see the sub.

We will be making a divisional board in the trunk.
You will not be able to see the box.
This board will also be the amp rack.
I will be using Crisp's amp board desing with the connectors
Image
I will not be using a cap this time around.
I have a second battery Batcap 800
Also I will be installing my Iragi 250amp alternator with custom belt.

I will be posting pic as the project starts taking shape.

PostPosted: Fri Jan 09, 2009 4:42 pm
by LEE337
^^^I'm very interested in the Iragi 250amp alternator with custom belt.
Could you tell me more about it???

PostPosted: Fri Jan 09, 2009 6:39 pm
by Donnie
Glad to see it coming back up so quick.

PostPosted: Fri Jan 09, 2009 7:22 pm
by crispone
Thanks for the reference! I have to tell you all the AMP BOARD with COVER setup was originally purchased from Prodigy (JAMES). I did not design... just my "setup".

I still need to get measurements of the two boards for anyone interested, and will post them in my thread when I get them! :wink:


(THE CAR IS BACK from the shop, so I MAY get back at it soon!)


...unfortunately, there is a SNOW STORM coming, so I might not be able to work on the 'lara AT ALL this weekend! :-?


-crisp :evilbat: :drinking: (Belgian Wheat!)

PostPosted: Fri Jan 09, 2009 9:52 pm
by Solara08861
my last set up I had the same board that crisp had with 2 RF power amps. this time around I dont want to cover the back of seat trunk opening.
Image

PostPosted: Sat Jan 10, 2009 2:35 pm
by Black Bob
I see you're going with a more rounded sound with the two 8's and the tweeters. Your old setup I can imagine was good for listening to bottom heavy music but I think your new setup would handle everything from Ice Cube to Mozart if you're the eclectic type. Let us know of your opinion on how much of an effect the new setup with firing the woofers into the back seat rather than the rear deck has on your low-end.

PostPosted: Sat Jan 10, 2009 2:41 pm
by Solara08861
I decided to go back to the extreme. I just ordered 2 more 8inches and going back to a 3 amp set up.

PostPosted: Sat Jan 10, 2009 6:34 pm
by crispone
Solara08861 wrote:I decided to go back to the extreme. I just ordered 2 more 8inches and going back to a 3 amp set up.


TRI-AMP FTW! :wink:



-crisp :evilbat:

PostPosted: Sat Jan 10, 2009 7:03 pm
by redgen1
can't wait to see the end product man

PostPosted: Thu Jan 15, 2009 7:07 pm
by Solara08861
I just got my speakers and tweeters delivered
Pics are not that great G1 cell phone cam is not the greatest
4Beyma8"
Image

Set of Beyma bullet tweeters
Image

I have all 3 amps ready.

Dropping the speakers to the shop for custom rear deck.
Dropping car Saturday to get all the burned wires and system wiring done and windows retinted. Then install all the interior parts.
Leaving the seats for last.

PostPosted: Fri Jan 16, 2009 12:23 am
by LostSoul
daim "Solara08861'' nice once again what size are those tweets and where u hooking those up at??

how bout the 3 amp set -up what amp to what speakers??

PostPosted: Sat Jan 17, 2009 7:46 pm
by Solara08861
The 4 8inch Beymas are going to this amp
RF T8004
Image

The 12inch T2 sub will be with this amp
T10001
Image

The third amp will be a RF T4004 or P4004 to power the fronts Infinity Kappas and the all the tweeters

Hopefully wll have everything done by the end of the week.

PostPosted: Sun Jan 18, 2009 2:23 am
by NightRider
If you mind me asking but what dimensions you used for the amp board you placed them on? Im referring to your first picture w/ the pioneer amp on it. I need to make a custom one to put my amp setup like that.

PostPosted: Sun Jan 18, 2009 11:41 am
by crispone
NightRider wrote:If you mind me asking but what dimensions you used for the amp board you placed them on? Im referring to your first picture w/ the pioneer amp on it. I need to make a custom one to put my amp setup like that.


Hi NightRider!

Sorry, I haven't taken the dimensions yet! The pictured board is in my 'lara, but I purchased the boards from another SG member, "theprodigy79" (James) some time ago.


I'll go downstairs and take a quick measure of the amp board for you guys. I've been working on it in the basement. The cover board is in the trunk, so I'll have to see if it opens with all the SNOW burying the car!


-crisp :evilbat:

PostPosted: Mon Jan 19, 2009 8:16 pm
by Solara08861
First day of build
We did the custom deck, installed the 4 8 inch , re tinted the rear windows and made custom third break light.
I will take pics in the morning. It was dark by the time I got the car.
Tomorrow we will re-wire all 3 amps, second battery, alternator and try to finish the custom amp rack on the trunk.