[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - display buttons dont work~
Page 2 of 2

PostPosted: Tue Nov 06, 2007 8:51 am
by iinokturnolii
[SMAN] wrote:
NightRider wrote:ok now where do you "ground" the 3 wires too? meaning the chassis?


Any major piece of metal. If you have an aftermarket radio harness, you can also splice into the black wire.


your going to confuse them even more....



nightrider: just ground only the yellow and gray wire... not all three

PostPosted: Fri Nov 09, 2007 7:14 pm
by dvdchris45
I GROUNDED THE YELLOW WIRE AND IT F**KING WORKS!

I RARELY TYPE IN CAPS, BUT MY EXCITEMENT COULD NOT BE HELD BACK. FINALLY!

PostPosted: Fri Nov 09, 2007 10:45 pm
by iinokturnolii
:sweet: its been so long huh...

PostPosted: Sat Nov 10, 2007 2:41 am
by dvdchris45
iinokturnolii wrote::sweet: its been so long huh...


2 years and 11 months to be exact!

PostPosted: Sat Nov 10, 2007 7:35 am
by Sebas007
^^^

haha WOW !! You really need to party...almost 3 years...way more rare then Christmas or any other holiday ! :P

PostPosted: Fri Mar 05, 2010 8:19 pm
by inphluence
I just did this right now and it worked great. Thanks again for the info. I was getting tired of seeing 99.9 MPG at times. Now if someone has a trick for the volume controls then we can all really celebrate. Haha.

PostPosted: Fri May 07, 2010 9:54 pm
by vintvint
hay brother i really want to know which harness you guys talking about??? i just installed the new HU and i will install the PAC-PS next week...... if i want have my display work again it is mean i need to grand the wire than my button will work again.... i know i am little bit stupid...