[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Eric Sol BBK
Post your Toyota Solara and Camry related items up for sale or where to buy. The SolaraGuy website takes no responsibility for items posted in the forum.

Eric Sol BBK

Eric Sol BBK

Postby Sp33d » Mon Mar 23, 2009 11:28 pm

I made a batch of ten back in august and still have one set left.

selling 160 shipped. paypal is mark_huynh@msn.com

-Mark
Sp33d
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1061
Joined: Mon Feb 28, 2005 11:15 pm

Postby Gibson99 » Wed Mar 25, 2009 7:54 am

What all comes in the kit? Pics? I've only read small bits here and there about this ericsol kit, and have never seen one. What's involved in installation, and are any other parts needed?
User avatar
Gibson99
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 350
Joined: Mon Feb 09, 2009 3:09 pm
Location: Cypress, TX

Postby sydemoid » Wed Mar 25, 2009 8:03 am

You're going to need new rotors from a MK4 Supra turbo, 13.5 inches, the ericsol kit, is a relocation adapter, which allows the stock brake caliper to be mounted further out, thus allowing you to use a bigger rotor, which in turn increases brake torque.
This provides a bg advantage over a stock system, I personally recommend goodrich steel braided brake lines, and an upgrade to DOT4 brake fluid, as well as either metallic, or carbon metallic pads for you to notice serious gains. ;)
Geeks get it done, while Nerds whimper and call for mommie.
sydemoid
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 583
Joined: Wed Aug 31, 2005 10:51 pm
Location: Las Vegas

Postby Gibson99 » Wed Mar 25, 2009 8:36 am

OK, so what is the new minimum wheel size? 16 or 17? Can you use Supra calipers with those rotors? I bet there's more, better brake pad options for the supra calipers than for any camry/avalon/etc caliper, plus it's probably a larger caliper.

I already have goodridge SS brake lines and DOT4 fluid - ATE blue actually. No complaints when paired with Axxis ultimate pads, even in stock size. Then again, I don't know how brake fade will be with these pads if I ever take it out to the track. On the street it's nearly as good as my miata... but the miata has carbotech panther plus pads in front and axxis ult in back... and stock brake lines... but it also weighs 1000 lbs less. :)
User avatar
Gibson99
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 350
Joined: Mon Feb 09, 2009 3:09 pm
Location: Cypress, TX

Postby Eye8Pussies » Wed Mar 25, 2009 9:11 am

you still need 17" wheels to clear the brakes
HaHa
Image
__________________

Ripped...and the girls are loving it. ;)
Eye8Pussies
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1662
Joined: Thu Mar 09, 2006 9:35 am

Postby trdkamuri51o » Wed Mar 25, 2009 9:21 am

bump for a good seller.. i have this kit on my car and im soo pleased wtih the braking performance..

its a huge increase that i saw straight out

i tested the difference in braking before and after (4cyl)(v6 brakes)(supra rotors now) and there is a noticeable difference in the distance to stop..

gibson if you get it the minimum wheel size is 17"
that means a spare of that size too..
need wheels? www.memoryfab.com - ask for david

-1JZ Bozo Camry = Cooler than Penguin crap in January on the face of Pluto.
trdkamuri51o
SolaraGuy Professional Racer
SolaraGuy Professional Racer
 
Posts: 4227
Joined: Sun Apr 11, 2004 10:11 am
Location: Hayward, bay area

Postby corlon » Wed Mar 25, 2009 10:52 am

pm'd and paid.
NiCe
User avatar
corlon
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 788
Joined: Mon Nov 26, 2007 11:26 pm
Location: midwest

Return to For Sale Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 47 guests