TRD Charger kit Complete+ extra 7 psi pulley +EBC + more
Going to put my trd charger on the market. It's had the supercharger oil changed about 5k miles ago.
I will have it ready and out of my car in a week or 2. I will include everything that is needed to run this kit.
trd sc + idler plates+ hardware
stock pulley
a 7 psi pulley
belt for the 7 psi pulley
lime top supra injectors 315cc
TRD EBC unit
EGR tube for auto
misc hoses and extra hose fittings
instructions
whatever else I can find for the trd charger
Carb Sticker never used + belt routing decal
Currently there are a few holes drilled and tapped into the side of the chamber after the charger for hose fittings for vaccuum hoses to map sensor and another for air intake temp sensor. I will include the plugs for them in case you don't want to use those ports but is convenient if you are going to use them.
No need to bother with sourcing little parts here and there to complete a kit.
I know my rating is low here but i have close to 150 trader rating on the mr2 boards that's nothing but flawless.
under MR2Hybrid93 @ mr2oc.com
Looking to get 2500 out of this.
http://www.flickr.com/photos/mr2hybrid9 ... 544705475/
I just shipped a bike rack out so I have a ton of shipping supplies left over. Will be packaged very well to protect such a high dollar item.
I will have it ready and out of my car in a week or 2. I will include everything that is needed to run this kit.
trd sc + idler plates+ hardware
stock pulley
a 7 psi pulley
belt for the 7 psi pulley
lime top supra injectors 315cc
TRD EBC unit
EGR tube for auto
misc hoses and extra hose fittings
instructions
whatever else I can find for the trd charger
Carb Sticker never used + belt routing decal
Currently there are a few holes drilled and tapped into the side of the chamber after the charger for hose fittings for vaccuum hoses to map sensor and another for air intake temp sensor. I will include the plugs for them in case you don't want to use those ports but is convenient if you are going to use them.
No need to bother with sourcing little parts here and there to complete a kit.
I know my rating is low here but i have close to 150 trader rating on the mr2 boards that's nothing but flawless.
under MR2Hybrid93 @ mr2oc.com
Looking to get 2500 out of this.
http://www.flickr.com/photos/mr2hybrid9 ... 544705475/
I just shipped a bike rack out so I have a ton of shipping supplies left over. Will be packaged very well to protect such a high dollar item.
Last edited by hybrid2 on Fri Mar 04, 2011 7:49 pm, edited 1 time in total.
[img]http://img.photobucket.com/albums/v461/zhao8888/siggy2.jpg[/img]
Progression.. through time and hard work.. only got me this far..
[url]http://www.mr2.com/forums/vbpicgallery.php?do=view&g=700 [/url] <<<Details of my deuce
Progression.. through time and hard work.. only got me this far..
[url]http://www.mr2.com/forums/vbpicgallery.php?do=view&g=700 [/url] <<<Details of my deuce
- hybrid2
- Regular SolaraGuy Member
- Posts: 64
- Joined: Mon Oct 08, 2007 11:34 pm