WTT: Gen 1.5 TRD Front Lip for Gen 1 TRD Front Lip

[funboy102]

Exactly like the title said. Does anyone have the two front lip from a Gen 1 TRD kit and would like to trade it for the two front Gen 1.5 TRD front lip? I'm willing to do an even trade, each person pay for their own shipping.

[Got2XLR8 NYX]

Thats gonna be tough to find... why dont u just use the 1.5's? they fit fine u just have to use a lil ingenuity to do it... theres a tutorial for how to do it...

[LatinUSMC]

wheres that tutorial .?? i have a gen1 w a 1.5 front lips and i was a head ache because there is a lish curve/fitmnet issue.. seems liek the kit want to pull AWAy from the bumper..so ihad to Gorrilla glue Phuc outta the lip 3M tape was worthless..cramped my arm putting pressure till the Bond sealed..+ was really messy?

[YESCA]

^^6 Thats what you use a haet gun to make it plyable

[funboy102]

:o wheres that tutorial .?? i have a gen1 w a 1.5 front lips and i was a head ache because there is a lish curve/fitmnet issue.. seems liek the kit want to pull AWAy from the bumper..so ihad to Gorrilla glue Phuc outta the lip 3M tape was worthless..cramped my arm putting pressure till the Bond sealed..+ was really messy?

Yup, where is the tutorial? Cuz it seems like I have to do some heavy bending in order to get the front pieces to stay on, and then either gorilla glue it like Josue or drill holes into the pieces and then screw them in.

[SdeA]

^^ Its easier if you have 2 people. One can bend it in and the other can screw it on. Thats what I did.

[DaZanY4002]

I had put 2 screws under the lip, where the blue is. But I did need to force it Like SdeA, I used a second person. I used self tappers or self lockers I think is what the screw type is called, but clearly it doesn't take much force for them to be ripped out, so I might try some kind of nut and bolt approach once ^Adrian's front passenger lip comes in during the next couple days That 3M is pretty much worthless through out the entire middle section of the lip though man.

[funboy102]

^^ Its easier if you have 2 people. One can bend it in and the other can screw it on. Thats what I did.

I had put 2 screws under the lip, where the blue is. But I did need to force it Like SdeA, I used a second person. I used self tappers or self lockers I think is what the screw type is called, but clearly it doesn't take much force for them to be ripped out, so I might try some kind of nut and bolt approach once ^Adrian's front passenger lip comes in during the next couple days That 3M is pretty much worthless through out the entire middle section of the lip though man.

Thanks for the advice Danny and Derrick (right?). I need to install it soon before I become lazy and be one of those "eh, I have it in my garage, I just need to install it" person, haha. Who know, maybe I'll get lucky and someone will want a brand new 1.5 front lips for their slightly used/new gen 1 front lips