Re: Rough idle then stall...please help
And now she's back to idling like crap.
-
GzNutz - SolaraGuy Semi-Pro Racer
- Posts: 2354
- Joined: Mon Oct 22, 2007 7:36 pm
- Location: Land of Beer
GzNutz wrote:I'm using a urd maf-sc which is the same as the split second psc-(03?). It's soldered in. I'll try hooking up the laptop tomorrow and see if it's getting a correct reading in the r4 program from the box. Would you happen to know if the pcv valve opens against a spring force, preset tension, or if it's just a loose one way check valve?
Freeze Frame Information
Parameter Description Value
DTC for which Freeze Frame was Stored P0171
Fuel System 1 Status Closed Loop
Fuel System 2 Status Closed Loop
Calculated LOAD Value 16.47 %
Engine Coolant Temp 183.20 °F
Short Term Fuel Trim - Bank 1 19.53 %
Long Term Fuel Trim - Bank 1 28.91 %
Short Term Fuel Trim - Bank 2 18.75 %
Long Term Fuel Trim - Bank 2 35.94 %
Engine RPM 1,507.75 rpm
Vehicle Speed Sensor 42.25 mph
Ignition Timing Advance #1 Cylinder 38.00 °
Intake Air Temperature 19.40 °F
Air Flow Rate Mass Air Flow Sensor 1.05 lb/min
Absolute Throttle Position 18.43 %
Return to Aftermarket Gen 2 and 2.5
Users browsing this forum: No registered users and 8 guests