HALO FOG LIGHTS!!!

by **Jack Soulfire** » Tue Mar 13, 2007 4:30 pm

Definitely not my cup of tea.

by **dvdchris45** » Tue Mar 13, 2007 5:12 pm

props on a unique mod.

but i'll take my tinted foggies thankyouverymuch

by **crispone** » Tue Mar 13, 2007 8:14 pm

I'd like to see them LIT in the main fog beam... and then BOTH fog AND rings... in say... blue?

(I suppose as a "fixed" color, and with the center lit... it might look "interesting"... I'd have to see it.)

(Sorry on the "CLOWN CAR" comment! I was seeing a "stroboscopic effect" where the colors were "cycling" or something. I could see a color like "yellow" or "blue" WITH the fogs to add a "color effect" around the perimeter... but I would want to see what it looks like.)

Do they still give off "good light"? (That is the most important factor to me... I went with HALOGENS below because they are better in rain than HIDs... and ULTRA High Beams in Halogen as well, with just the LOW beams in 5300k HID.)

Can you post some more pics with BOTH lit in several colors?

(Note: I agree, you could "double tape" right over the hole... change removed, and shavings cleaned... it'd probably look nice and clean.)

-crisp :evilbat:

by **michaels artic frost** » Tue Mar 13, 2007 11:17 pm

Nice work, as long as you're happy, that's what matters most :wink:

We do mods and upgrades not to please others... to please ourselves. If you did the work yourself, which it looks like u did, then that's just even better. It's kinda like this...if you're mechanically inclined...say like Milton...everyone knows that he can drop a lara or camry or any car for that matter...like there's no tomorrow and everyone knows that, therefore he's good at what he does. However, other may not want to lower their cars and sacrifice the ride quality.

Anyhow, I think the best part is that you're able to share your mods/upgrades w/ others and get feedbacks from it. That's what I like most...even if the feedback is negative...just goes to show you that everyone has their own acquired taste.

So, if you're able to do the work, then PROPS! PROPS! PROPS!

...my 2 cents...or is it 3...jk

-Michael T.

by **scLara626** » Wed Mar 14, 2007 12:00 am

Somebody had to be the lab rat

by **funboy102** » Wed Mar 14, 2007 1:02 am

dvdchris45 wrote:props on a unique mod.

but i'll take my tinted foggies thankyouverymuch

hey, when you tinted your fogs, did you remove it from the bumper then tinted it? or you left it on the bumper and tinted them?

by **michaels artic frost** » Wed Mar 14, 2007 5:53 am

funboy102 wrote:
dvdchris45 wrote:props on a unique mod.

but i'll take my tinted foggies thankyouverymuch

hey, when you tinted your fogs, did you remove it from the bumper then tinted it? or you left it on the bumper and tinted them?

We don't have to remove our bumpers to remove the fogs. Atleast I didn't, not sure about anyone else.

-M

by **solaraslev67** » Wed Mar 14, 2007 7:29 am

I like it man, it looks nice I do think it would need to match the headlights as others have said. Nice job, definitely cover up the hole you drilled because yea, if you mount the switch on it I think that would work best, if you already havents. All and all, I like it. Nice Job.

by **funboy102** » Wed Mar 14, 2007 11:29 pm

michaels artic frost wrote:
funboy102 wrote:
dvdchris45 wrote:props on a unique mod.

but i'll take my tinted foggies thankyouverymuch

hey, when you tinted your fogs, did you remove it from the bumper then tinted it? or you left it on the bumper and tinted them?

We don't have to remove our bumpers to remove the fogs. Atleast I didn't, not sure about anyone else.

-M

haha, read my post again... "did you remove it from the bumper then tinted it? or you left it on the bumper and tinted them?"

As in, did you remove the fog light FROM the bumper, then tinted the fog light while it's off of the bumper, or was it tinted why still installed in the bumper. For gen 1, we don't have to remove our bumpers also to remove the fogs, haha. But thanks for trying to help anyways.

answer dvdchris?

by **kingkakyle** » Wed Mar 14, 2007 11:49 pm

well mine is done kind of bad cuz of damn sticker city, so im gonna try again later
but yes u can do it while its still on the bumper, but its probably easier to do it off, if u can, depending on how difficult it is to remove
that sort of answers ur question but not really

by **---CAMRAZY---** » Thu Mar 15, 2007 12:21 am

funboy102 wrote:
haha, read my post again... "did you remove it from the bumper then tinted it? or you left it on the bumper and tinted them?"

As in, did you remove the fog light FROM the bumper, then tinted the fog light while it's off of the bumper, or was it tinted why still installed in the bumper. For gen 1, we don't have to remove our bumpers also to remove the fogs, haha. But thanks for trying to help anyways.

answer dvdchris?

Same answer for the gen2, I was with Junest (White Convertible Gen2) a few years ago when sticker city done it for here.... WITHOUT removing the light or the bumper to place the tint.

by **scLara626** » Thu Mar 15, 2007 12:22 am

We need some vidz of this light show

by **---CAMRAZY---** » Thu Mar 15, 2007 12:23 am

scLara626 wrote:We need some vidz of this light show

Its the same like going to the Disney Electric parade (back in the day)........

by **kingkakyle** » Thu Mar 15, 2007 12:27 am

---CAMRAZY--- wrote:
scLara626 wrote:We need some vidz of this light show

Its the same like going to the Disney Electric parade (back in the day)........

i think i was 5-7 years old....that was awhile ago haha

by **funboy102** » Thu Mar 15, 2007 12:42 am

---CAMRAZY--- wrote:
scLara626 wrote:We need some vidz of this light show

Its the same like going to the Disney Electric parade (back in the day)........

LOL.... and now guys... to relive that magic...

http://youtube.com/watch?v=X7woJN8KNqM

haha, now tell me guys, is that BG music and BG voice tight... or is it tight??? haha

check out 1:20... "Presented by Sylvania" Yup... the same guys that make our OEM headlight bulbs yO!

HALO FOG LIGHTS!!!

Who is online