Blacking out the Solara

[parkc96]

ive seen a couple cars in my school parking lot with tinted headlights and one looked like the tint was melted, never seen fogs tinted, just what ive seen though idk about anyone else

[GzNutz]

I've got my fogs tinted and have had no issue with hids melting the vinyl.

[wkbrdr91]

I've got my fogs tinted and have had no issue with hids melting the vinyl.

My tint guy said the fogs are fine, but the normal headlights with projectors are the problem.

[Black Bob]

The projector lamps are pretty heat intense, I learned that first hand after a bodyshop repair when Toyota shipped cheapened OEM plastic housings--burned, cracked and dried the plastic lens cover from the inside out. (Consider yourself especially forewarned when buying non-OEM replacements.) I know for a fact 3M makes a high temp formulated film but I DON'T know what brand they sell it under, nor if it will adhere, nor what thickness or colors they offer for that material. I work for a company that 3M considers as a competitor so they pretty much hang up on me, however you can try. Try their Energy & Advanced Materials Division (800)367-8905 (real phone#, I wouldn't prank ya with a midget sex line so early on a Monday dawg, trust me! )

[wkbrdr91]

The projector lamps are pretty heat intense, I learned that first hand after a bodyshop repair when Toyota shipped cheapened OEM plastic housings--burned, cracked and dried the plastic lens cover from the inside out. (Consider yourself especially forewarned when buying non-OEM replacements.) I know for a fact 3M makes a high temp formulated film but I DON'T know what brand they sell it under, nor if it will adhere, nor what thickness or colors they offer for that material. I work for a company that 3M considers as a competitor so they pretty much hang up on me, however you can try. Try their Energy & Advanced Materials Division (800)367-8905 (real phone#, I wouldn't prank ya with a midget sex line so early on a Monday dawg, trust me! )

Thanks I will be giving them a call

[TLMNICK]

That is strange. I've never wrapped a projector headlight with tinted film before, so I couldn't tell you for sure if the heat would be an issue or not. I have however wrapped all kinds of headlights (projectors included) in 3M CLEAR film. I've never had an issue at all with melting. Assuming that the material is the same...only tinted, it should work just fine. Either way, I think if you were able to get the lights open to back them out, that'd look awesome too.

[Hammer1080p]

looks dirrty boss.. did the exact same with my grill, emblem, and hood lip... i shaved the solara, se, and toyota from the back and kept the emblem silver.. just recently(friday) i took the front parts to a body shop to get painted...i loved the....murdered out look;) , but i opted for red, i hope it doesnt look to 'ricey' looks good on ur end...