Projex0 wrote:hey phil can you measure the stock lenz for me? also dude did you use the oven to open them up or heat gun?
as far as shields go u think it can be reached from the back opening to bend it closed or will i need to open the HL up
You need to open up the headlight, it's a metal piece of bracket between the lense and bulb holder and its impossible to get to without opening up the headlight. If you find a way of bending the shield without opening up the headlight, please let us know.
As for which way to bend, I would bend it towards the bulb holder, and not towards the lense. Again, if you don't want to weld it like Milt, you should cover it up with aluminum tape.
If you really want to spend some time doing a good retrofit, I would swap the lense with clear lenses. The rippled lenses from the Solara is not going to do it. Also, if you still have the RX330 projectors, I would experiment a bit. Notice how the cutoff shield from the RX300 is different from the Solara. The Solara cutoff shield is made for halogen, notice how its a U shape. The RX330 has a more defined m shape. If you could somehow cut a piece of aluminum tape and cover up a portion of the U shape on the Solara cutoff and have it match the RX330 cutoff, you would have HID projectors instead of that stupid U shape halogen that we get. I hope you understand what I mean.
by RDKamikaze » Thu Aug 23, 2007 2:54 pm 
.
