[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - weapon r intake install

Skip to content

Talk about aftermarket Toyota Solara Gen 2 and 2.5 upgrades.
Post a reply

weapon r intake install

weapon r intake install

Postby KSolara » Sat Dec 31, 2005 2:00 pm

I was trying to install the Dragon intake from weapon r but i found that it comes with a extra 10mm pipe that is sposed to connect to the PVC port..
the OEM box did not have a 10 mm hose and i dont have a clue where this PVC port is or what it looks like...
o4 SE I4 Lunar mist
Image
KSolara
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 199
Joined: Tue Sep 13, 2005 11:47 am
Location: Aberdeen, NJ
Top

Postby dominoSLEV6 » Sun Jan 01, 2006 8:03 am

Sorry to say, but I think you may have bought an intake for the gen 1/1.5 Solara.

As far as I know, Weapon R does not have an intake for your car, and often times I see auctions and websites mislabeled for 99-04 rather than 99-03.

I could be wrong as I don't know a whole lot about Gen 2's, but I believe that's the case. Hopefully you can return it. If so I recommend investing in a Custom Performance Engineering intake. Check cp-e.com for more details.

-chris
Image
It will run one day, RPMs EVERYWHERE!
dominoSLEV6
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1575
Joined: Thu Jun 02, 2005 10:28 pm
Location: 561 Florida
Top

Re: weapon r intake install

Postby PhreakdOut » Mon Jan 02, 2006 7:01 pm

KSolara wrote:I was trying to install the Dragon intake from weapon r but i found that it comes with a extra 10mm pipe that is sposed to connect to the PVC port..
the OEM box did not have a 10 mm hose and i dont have a clue where this PVC port is or what it looks like...


I suspect Weapon R copiedthe Injen intake. There is one extra 5/8" tube that should be capped off. See my tutorial on installing the Injen Intake. It should go in the same way.

http://www.solaraguy.org/viewtopic.php?t=18389
-- The Phreak
'04 350Z 6spd Touring Roadster w/Nav | Megan Racing | Greddy | Nissan Motorsports | Whiteline | Wicked Tuning | Giovanna | Injen | Polished Intake & Throttle Body | Eibach | Central 20 | Stillen | Misc CF Items
User avatar
PhreakdOut
Mod Alumni
Mod Alumni
 
Posts: 4879
Joined: Wed Jun 23, 2004 9:03 pm
Location: Ann Arbor, MI
Top

Postby KSolara » Wed Jan 04, 2006 6:30 pm

thx phreaked but my friends and i decided to cap the tube the other day when we looked at my budy's accord intake which was capped too..
the intake is working fine now.. ill post pics some day soon... but it sounds sweet
o4 SE I4 Lunar mist
Image
KSolara
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 199
Joined: Tue Sep 13, 2005 11:47 am
Location: Aberdeen, NJ
Top
Post a reply

Return to Aftermarket Gen 2 and 2.5

Who is online

Users browsing this forum: No registered users and 16 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net