Clear Corners DONE !!! 1st in CA !

[sorkang724]

I'm finally done with my clear corners. I must say it took alot of work , but it was well worth it, click links below to check them out ! Took about 2 hours or so, because my friend has previous experience with it, so all we had to do was take out the parts, bake the headlight, then remove reflector and put everything back. if you need anymore info, let me know.



http://i5.photobucket.com/albums/y160/s ... G_1674.jpg

http://i5.photobucket.com/albums/y160/s ... G_1677.jpg

http://i5.photobucket.com/albums/y160/s ... G_1678.jpg

http://i5.photobucket.com/albums/y160/s ... G_1684.jpg

http://i5.photobucket.com/albums/y160/s ... G_1682.jpg

http://i5.photobucket.com/albums/y160/s ... G_1683.jpg

[Jai_Jai_Binks]

COngrats on the first to attempt!

[got sport]

Nice work...now I'm tempted to do it too...but that first picture scares me.

[ndoyank]

You must have had a big oven cause our lights are HUGE!

I have a extra set of lights that im tempted to try it on. I'll probaly try it in a couple of weeks. Cause it just looks so clean. Sorkang... did you run into any problems? Did you actually bake them in an oven or go with a blow dryer like Mike? Also, did you seal it up with anything or did you use the exisiting adhesive?

[sorkang724]

yes guys, it sounds like alot of work, but is not. make sure you do it with a buddy tho, i actually bake it in the oven, the buddy who helped me have numerous experience with baking headlights, so i was not worry. the headlight actually did not fit in the oven, we had to bake it with the oven open , we just check it every few minutes to see if the silicone melted.

[michaels artic frost]

Nice work Jackie! Props bro! Hella nice and clean.

[SpeedSTARs]

Da..yam looking pretty stealth ... Good job, keep up the good work.