[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - just dynoed the beast again.
For those looking for more speed through force. Forced Induction; Supercharger,Turbocharger or Nitrous discussion and maintenance.

just dynoed the beast again.

Re: just dynoed the beast again.

Postby albertrd » Sun Sep 30, 2012 10:58 pm

^^^^^^^^^ even shawn was like " you must have a mp112" once he saw those #s :o :o :o :o and BTW he was also going to bust out with some sheets until he saw the blower :drinking: :lol: :lol: :lol: :lol:
User avatar
albertrd
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 117
Joined: Sat Apr 17, 2010 12:31 am
Location: so cal

Re: just dynoed the beast again.

Postby albertrd » Sun Sep 30, 2012 11:04 pm

Okay night night :sleeping: :sleeping: :sleeping: :sleeping: :sleeping: :sleeping:
User avatar
albertrd
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 117
Joined: Sat Apr 17, 2010 12:31 am
Location: so cal

Re: just dynoed the beast again.

Postby JimKing » Sun Sep 30, 2012 11:27 pm

pablo wrote:Does water or methanol injection increase the amount of air being pumped by the supercharger?


In effect, yes. Dumping as much water/meth through the SC as Greg is will have a huge effect on the outlet temps and hence density of the air. His delta T may be near zero.
JimKing
Just Licensed SolaraGuy
 
Posts: 17
Joined: Sun Apr 09, 2006 7:34 pm

Re: just dynoed the beast again.

Postby trd4life » Mon Oct 01, 2012 6:12 am

JimKing wrote:Astounding! Besides stock internals h20/meth injections, what are the details of your setup?
Is this a straight 1mz or a 1mz/3mz hybrid?



3mz block, 1mz heads Jim. Only internal work is ARP headstuds, 9.8:1 headgaskets. Ported TRD blower with 1.9" pulley (12.3psi on dyno 13.5psi on street), custom add on idler plate extension for super belt wrap, TT MAF, and a fuel/timing controller.


-gabe
Last edited by trd4life on Mon Oct 01, 2012 7:25 am, edited 1 time in total.
Image
GLP Motorsports is on Facebook
Toyota/Lexus Forced Induction Specialist

We just built a triplecharged Solara! Twin Turbo + S/C= 411whp 482 tq at LOW BOOST
User avatar
trd4life
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2142
Joined: Wed Jan 29, 2003 7:15 pm
Location: saco,maine

Re: just dynoed the beast again.

Postby Brandoe91 » Mon Oct 01, 2012 7:16 am

Congrats on the numbers. Ye Ye, we have all heard that Church's hub dyno tends to read higher( 7-8%*) than most Dynojets. That would put Greg at 340whp 397wtq* which is still the fastest Trd supercharged 1mz on a stock block. Either way good numbers, 400wtq is f-ing ridiculous. What I like more than the numbers, is that the Socal guys are consistently trying to push the envelope of our platform. When are you hitting the track again?
TRD S/C 6psi - OBX Full Exhaust - Injen intake ( 226whp untuned).

New Setup - 3mzfe - obx full exhaust - aem fic - innovate mtx-l wideband - Cpe intake. (Estimated 220whp) dyno numbers coming soon.
Brandoe91
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 290
Joined: Sat Sep 25, 2010 10:53 pm
Location: South Florida

Re: just dynoed the beast again.

Postby Gregtrd » Mon Oct 01, 2012 8:47 am

2 weeks
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana

Re: just dynoed the beast again.

Postby JimKing » Mon Oct 01, 2012 10:43 am

Was this with straight 91 octane, race gas, or some other mix of 91 + E85 or tolulene / xylene or some such? Stock knock sensors or relocated or aftermarket (eg. J&S)?
400 lbs of torque @ 3300rpm must be insane to drive.
JimKing
Just Licensed SolaraGuy
 
Posts: 17
Joined: Sun Apr 09, 2006 7:34 pm

Re: just dynoed the beast again.

Postby pablo » Mon Oct 01, 2012 11:27 am

JimKing wrote:
pablo wrote:Does water or methanol injection increase the amount of air being pumped by the supercharger?


In effect, yes. Dumping as much water/meth through the SC as Greg is will have a huge effect on the outlet temps and hence density of the air. His delta T may be near zero.


To be specific it's going to increase flow, by increasing compressor efficiency, and having a positive effect on pressure ratios, but it doesn't directly increase the amount of air going into the motor, just allows the supercharger to more efficiently do so.

I realize it's splitting hairs, but it's why you don't need to use different data for a supercharger using methanol injection. The flow is going to be very similar to the supercharger at a better pressure ratio.

Regardless, I'm sure it's a very fun car at the boost it is running.
pablo
Just Licensed SolaraGuy
 
Posts: 12
Joined: Fri Apr 01, 2011 12:39 am

Re: just dynoed the beast again.

Postby Gregtrd » Mon Oct 01, 2012 12:31 pm

Quick question for you, why am I boosting 12.3-13psi with a 10.5psi pulley this shouldnt be possible right but its happening. Do you live in socal?
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana

Re: just dynoed the beast again.

Postby Gregtrd » Mon Oct 01, 2012 12:34 pm

Hey i posted the wrong boost level, im running a 1.9 pulley(10.5psi) not 11psi
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana

Re: just dynoed the beast again.

Postby pablo » Mon Oct 01, 2012 12:47 pm

Gregtrd wrote:Quick question for you, why am I boosting 12.3-13psi with a 10.5psi pulley this shouldnt be possible right but its happening. Do you live in socal?


Boost is a function of the air that isn't making it into the combustion chamber. So I'd assume you've reached some limit of flow, whether it's the cams, valves, exhaust, I don't know.

I don't live in Socal. I used to work for a company in Thousand Oaks so I was there fairly regularly. The closest thing I call home these days is Albuquerque, NM.
pablo
Just Licensed SolaraGuy
 
Posts: 12
Joined: Fri Apr 01, 2011 12:39 am

Re: just dynoed the beast again.

Postby DSM_Lara » Mon Oct 01, 2012 5:27 pm

Great numbers... I wanna see a video to hear how loud these cars Scream, So Cal doing it Big.
1999 Toyota Solara SE V6 (TRD Edition) Rare Greddy EvoII/CP-E Intake/Renova Grill/Black Housing Front/OEM Hood Deflector :kp: :spam3: :spam1:Musubi
Image
User avatar
DSM_Lara
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1847
Joined: Fri Jan 22, 2010 1:37 am
Location: MAUI, HI 96732

Re: just dynoed the beast again.

Postby Gregtrd » Mon Oct 01, 2012 5:43 pm

Pablo all your graphs dont apply to my set up, just got off the phone with Douglas from magnuson, i talked to him about my dyno numbers and he said that they had a lotus max a mp62 sc at 368whp, those #s you posted would be the max with out cooling, he told me that eaton will tell you that max rpm on a mp62 is 16k safely but with proper cooling like myself, im able to max it out at 18k rpm with out a problem, one of the reasons they wont recommend going higher then 18k rpm is because of the bearing tolerance, with proper cooling and high performance bearings should be able to go higher then 18k rpm. Btw after doing the math with my set up im at 20,125rpm, so i need to try to keep it under 5600 on the tach, with 3mz heads, over size valves, cams, should be able to squeeze more ponies.
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana

Re: just dynoed the beast again.

Postby a94autocamry » Mon Oct 01, 2012 6:39 pm

Here is my dyno sheet :)

Image
Image
slow white = "no show and no go"
a94autocamry
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 161
Joined: Thu Jul 15, 2004 9:43 pm
Location: LA

Re: just dynoed the beast again.

Postby Gregtrd » Mon Oct 01, 2012 7:51 pm

heres one of the dyno vids, 13yr old fuxked up the video.
http://www.youtube.com/watch?v=gkmTyMFTpLc&feature=plcp
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana
PreviousNext

Return to Forced Induction

Who is online

Users browsing this forum: No registered users and 12 guests