[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - just dynoed the beast again.
For those looking for more speed through force. Forced Induction; Supercharger,Turbocharger or Nitrous discussion and maintenance.

just dynoed the beast again.

just dynoed the beast again.

Postby Gregtrd » Sat Sep 29, 2012 9:33 pm

Just got back from church dyno, albert, andy, and i dynoed today here the numbers
andy hit 290whq and 289 wtq. Andy are the #s i posted right?, albertrd hit 350wtq & 320whp, yours truly hit 427wtq and 366whp @10.5psi, will post vids later.
we need more people do performance! wheel fitment, and hids is okay but not
Interesting in my opinion.
Last edited by Gregtrd on Mon Oct 01, 2012 8:47 pm, edited 1 time in total.
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana

Re: just dynoed the beast again.

Postby a94autocamry » Sun Sep 30, 2012 12:05 am

In the beginning when my car was doing pulls it was around the 290's...the final #'s after numerous pulls was 284whp and 282wtq...not exactly at 300whp but should be around 300-ish for both horsepower and torque to the crank/flywheel...I'm very happy with the results. :bday:
Seems like headers will make a difference amongst other things to hit the magical 300whp/wtq #

Anyways, great #'s to Greg and Albert. Greg - ur car is fu#$ing loud at full WOT :drinking:
Image
slow white = "no show and no go"
a94autocamry
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 161
Joined: Thu Jul 15, 2004 9:43 pm
Location: LA

Re: just dynoed the beast again.

Postby thenewguy » Sun Sep 30, 2012 11:46 am

Nice Greg! I agree moar performance!!
User avatar
thenewguy
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 227
Joined: Tue Dec 16, 2008 3:26 pm
Location: Murrieta, California (so cal)

Re: just dynoed the beast again.

Postby SolaraPete » Sun Sep 30, 2012 1:05 pm

You SoCal guys are getting awesome numbers!! Good job fellas!
'99 S/C'd 5spd: 6psi-KYB/Intrax-Kaminari-Renova- 2.5in w/TRD muffler-full Injen CAI w/crisp-mongo filter-Walbro 190-305cc-Jim's fuel-torque rod-8mm Magnecore-EGR delete-ACT 6-puck-AEM wideband-SAFC2-Supra/ES300 F+R brake conversion
User avatar
SolaraPete
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 266
Joined: Fri Aug 18, 2006 12:36 pm
Location: Illinois

Re: just dynoed the beast again.

Postby Gregtrd » Sun Sep 30, 2012 1:29 pm

Btw stock internals.
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana

Re: just dynoed the beast again.

Postby GzNutz » Sun Sep 30, 2012 6:46 pm

:shocked!: :sweet:
User avatar
GzNutz
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2354
Joined: Mon Oct 22, 2007 7:36 pm
Location: Land of Beer

Re: just dynoed the beast again.

Postby pablo » Sun Sep 30, 2012 8:37 pm

Those numbers are a bit of a stretch. Looking at the flow data for the M62
Image

and the power consumption
Image

366whp is basically unbelievable from a M62 supercharger. The supercharger is off the map, but even if you were to take the numbers for 14k rpm at 440cfm(and at 11psi it will be less efficient than at 10psi), relate it directly to 21k rpm(1MZ crank pulley is 6.2", supercharger pulley I assume is 2", which makes for a supercharger spinning at 21k and change at the 1MZ's redline of 6800rpm) and say the supercharger is flowing 660cfm(of very hot air judging by the temperature graph):
Image

We don't have all the data necessary to do an accurate representation, but 660cfm(and that's assuming the supercharger flows as efficiently that far off the map), of very hot air, minus the 56 hp it's going to take to drive the supercharger that hard, minus drivetrain loss...

A common rule of thumb is 150 cfm is good for 100hp, so 660 cfm will be 435hp. Minus the 56hp to spin the supercharger, 379hp. That leaves all of 13hp for drivetrain loss.

Or look at it from the other direction, 56hp to drive the supercharger, even being very liberal with drivetrain loss of 15%, do you believe a M62 supercharger is capable of making 475 hp? 366 x 1.15 = 420 + 56 = 475 at the crank.

I've also seen a car lose 20% going from Churchs to a Dynojet(no, not same day, but that's still more variance than most dynos will see).

go go gadget flame suit :D
pablo
Just Licensed SolaraGuy
 
Posts: 12
Joined: Fri Apr 01, 2011 12:39 am

Re: just dynoed the beast again.

Postby Gregtrd » Sun Sep 30, 2012 9:12 pm

Come to socal and I'll make u a believer, btw Im spraying 1250ml of water/meth, after 6 run my Sc is cold. You should go to the dyno with us next time, see for yourself. How much water/meth are they spraying in data you posted???
Last edited by Gregtrd on Sun Sep 30, 2012 9:33 pm, edited 2 times in total.
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana

Re: just dynoed the beast again.

Postby Gregtrd » Sun Sep 30, 2012 9:15 pm

Btw trd sc is not m62, its mp62.
When you go back to churchs talk to Shawn or Daniel about my camry.
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana

Re: just dynoed the beast again.

Postby albertrd » Sun Sep 30, 2012 9:32 pm

Gregtrd wrote:Btw trd sc is not m62, its mp62.
When you go back to churchs talk to Shawn or Daniel about my camry.

That's right. :shocked!: :crazyeyes: :lol: :lol:
User avatar
albertrd
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 117
Joined: Sat Apr 17, 2010 12:31 am
Location: so cal

Re: just dynoed the beast again.

Postby pablo » Sun Sep 30, 2012 9:55 pm

MP62 flow data shows very similar numbers:
Image

I believe the car is fast, just not that the numbers accurately represent what the engine is making.

Just saw that the image is transparent so original is here: http://www.capa.com.au/eaton_mp62_4th.htm
pablo
Just Licensed SolaraGuy
 
Posts: 12
Joined: Fri Apr 01, 2011 12:39 am

Re: just dynoed the beast again.

Postby JimKing » Sun Sep 30, 2012 9:57 pm

Astounding! Besides stock internals h20/meth injections, what are the details of your setup?
Is this a straight 1mz or a 1mz/3mz hybrid?
JimKing
Just Licensed SolaraGuy
 
Posts: 17
Joined: Sun Apr 09, 2006 7:34 pm

Re: just dynoed the beast again.

Postby Gregtrd » Sun Sep 30, 2012 10:01 pm

Once again show me data with water/meth injection.
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana

Re: just dynoed the beast again.

Postby pablo » Sun Sep 30, 2012 10:11 pm

Does water or methanol injection increase the amount of air being pumped by the supercharger?
pablo
Just Licensed SolaraGuy
 
Posts: 12
Joined: Fri Apr 01, 2011 12:39 am

Re: just dynoed the beast again.

Postby Gregtrd » Sun Sep 30, 2012 10:51 pm

GO GO DYNO SHEETS
Image
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana
Next

Return to Forced Induction

Who is online

Users browsing this forum: No registered users and 13 guests