[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Drivers engine stay spacer length?

Skip to content

For those looking for more speed through force. Forced Induction; Supercharger,Turbocharger or Nitrous discussion and maintenance.
Post a reply

Drivers engine stay spacer length?

Drivers engine stay spacer length?

Postby PlateLunch » Sun Aug 19, 2012 2:02 am

That's a mouthful! Does any one have an approximate length of the spacer used on the drivers side engine stud for the TRD S/C? Thanks.
User avatar
PlateLunch
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 210
Joined: Tue Aug 16, 2011 11:00 pm
Location: Wa.
Top

Re: Drivers engine stay spacer length?

Postby trd4life » Sun Aug 19, 2012 2:40 pm

PM gregtrd he may be able to get you the specs
Image
GLP Motorsports is on Facebook
Toyota/Lexus Forced Induction Specialist

We just built a triplecharged Solara! Twin Turbo + S/C= 411whp 482 tq at LOW BOOST
User avatar
trd4life
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2142
Joined: Wed Jan 29, 2003 7:15 pm
Location: saco,maine
Top

Re: Drivers engine stay spacer length?

Postby PlateLunch » Wed Aug 22, 2012 1:35 pm

bumpity bump bump bump...
User avatar
PlateLunch
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 210
Joined: Tue Aug 16, 2011 11:00 pm
Location: Wa.
Top

Re: Drivers engine stay spacer length?

Postby alltrac92 » Wed Aug 22, 2012 9:41 pm

Image
User avatar
alltrac92
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 409
Joined: Mon Mar 10, 2008 10:12 pm
Location: Citrus Heights, CA
Top

Re: Drivers engine stay spacer length?

Postby PlateLunch » Thu Aug 23, 2012 4:08 pm

Thanks bro! Is there any way you could measure it or put something in the pic for scale? You da man!
User avatar
PlateLunch
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 210
Joined: Tue Aug 16, 2011 11:00 pm
Location: Wa.
Top

Re: Drivers engine stay spacer length?

Postby alltrac92 » Thu Aug 23, 2012 6:44 pm

It's installed on my Camry so no go on the measurement. I would just thread two nuts on the threaded stud or you can stack some flat washers. If I had to guess I would say around 10mm.
User avatar
alltrac92
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 409
Joined: Mon Mar 10, 2008 10:12 pm
Location: Citrus Heights, CA
Top

Re: Drivers engine stay spacer length?

Postby PlateLunch » Thu Aug 23, 2012 10:50 pm

Thanks again!
User avatar
PlateLunch
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 210
Joined: Tue Aug 16, 2011 11:00 pm
Location: Wa.
Top
Post a reply

Return to Forced Induction

Who is online

Users browsing this forum: No registered users and 26 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net