[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Head Job ;D

Skip to content

For those looking for more speed through force. Forced Induction; Supercharger,Turbocharger or Nitrous discussion and maintenance.
Post a reply

Head Job ;D

Head Job ;D

Postby DSM_Lara » Tue May 29, 2012 4:58 pm

Getting ready for a Head Job... Leaking little oil from the rear valve cover :(
When I did change all my belts at 87k I forgot to do gaskets. Its always one thing after the other, hopefully after this I can finally do other things to this car.
Replacing all Valve Cover/Intake Gaskets, Spark Plugs, Oil Change, Trans Flush, and NST Crank Pulley.
Everything is mostly OEM from the dealership... I'm never going to put cheap ass parts in my car.
Please let me know if I'm missing any other parts (any other gaskets???), since I'm lifting mostly everything up... I know its a good opportunity to get a S/C, we will just have to see.

17176-62030 Air Surge Gasket
17177-20020 Intake Gasket Rear
17278-20020 Intake Gasket Front
11193-70010 Spark Plug Gaskets x6
11214-20010 Cylinder/Valve Cover Gasket Front
11213-20020 Cylinder/Valve Cover Gasket Rear
NST Crank Pulley anodized in Red

More stuff :D
25627-20010 EGR Gaskets
90480-18001 PCV Valve Grommet
90919-01194 Spark Plugs x6
19037-20011 Spark Wire/Cord Set
16261-20010 Water By-Pass Hose
16571-20020 Upper Radiator Hose
16572-20020 Lower Radiator Hose
Image
Last edited by DSM_Lara on Sat Jun 02, 2012 5:01 am, edited 3 times in total.
1999 Toyota Solara SE V6 (TRD Edition) Rare Greddy EvoII/CP-E Intake/Renova Grill/Black Housing Front/OEM Hood Deflector :kp: :spam3: :spam1:Musubi
Image
User avatar
DSM_Lara
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1847
Joined: Fri Jan 22, 2010 1:37 am
Location: MAUI, HI 96732
Top

Re: Head Job

Postby 1gSE » Tue May 29, 2012 5:07 pm

It'll be slightly more work, but since you're halfway there, I'd recommend replacing the coolant transfer hose under the lower manifold...and those gaskets
Image
GTO-Vararam/Kooks/Spintech/MGW-P/Tune-12.9 @108
Solara-M62 @ 5.5psi
User avatar
1gSE
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2050
Joined: Wed Apr 11, 2007 8:37 pm
Location: Abilene, TX
Top

Re: Head Job

Postby trd4life » Tue May 29, 2012 6:26 pm

pcv valve
Image
GLP Motorsports is on Facebook
Toyota/Lexus Forced Induction Specialist

We just built a triplecharged Solara! Twin Turbo + S/C= 411whp 482 tq at LOW BOOST
User avatar
trd4life
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2142
Joined: Wed Jan 29, 2003 7:15 pm
Location: saco,maine
Top

Re: Head Job

Postby dinoxor » Wed May 30, 2012 1:14 am

wow weird just today I too bought my front valve cover gasket and spark plug seal
User avatar
dinoxor
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 439
Joined: Wed Jun 02, 2010 6:04 pm
Location: Garland, TX
Top

Re: Head Job

Postby alltrac92 » Wed May 30, 2012 6:14 pm

Change the PCV valve grommet 90480-18001 I would also do plugs and wires. What about the EGR and EGR pipe 25627-20010 gaskets?
User avatar
alltrac92
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 409
Joined: Mon Mar 10, 2008 10:12 pm
Location: Citrus Heights, CA
Top

Re: Head Job

Postby mig0s » Wed May 30, 2012 9:11 pm

I read 'hand job' and was disappointed when I clicked the thread :P
1999 V6 5-Speed... so beautiful :' )
Black housing headlights, corner. 55w 6k HID, 2500k fogs, TWM Short Shifter+weighted knob, Tein+KYB, TRD lip kit + Acura CL type-S front lip. TSW Kyalami 18x8. Cutom 2.5" SS free flow muffler.
User avatar
mig0s
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 854
Joined: Fri Nov 13, 2009 11:00 pm
Location: Montreal, Canada
Top

Re: Head Job

Postby DSM_Lara » Thu May 31, 2012 5:58 am

:lol: :roll:
1gSE wrote:It'll be slightly more work, but since you're halfway there, I'd recommend replacing the coolant transfer hose under the lower manifold...and those gaskets

Yup, will be doing those too. :D
trd4life wrote:pcv valve

Gabe, I searched how to do the Tube Seals and your right they look like they are a PITA...
alltrac92 wrote:Change the PCV valve grommet 90480-18001 I would also do plugs and wires. What about the EGR and EGR pipe 25627-20010 gaskets?

PCV Valve, EGR Gasket picking it up tomorrow. Any recommendation of what type of plugs and wires I should get??? In other words probably the best performing products.
I'm hoping after this last maintenance my car should be running a lot smoother.

This Link will help me out a lot as a reference. ^_^
http://www.solaraguy.com/viewtopic.php?f=20&t=53130
1999 Toyota Solara SE V6 (TRD Edition) Rare Greddy EvoII/CP-E Intake/Renova Grill/Black Housing Front/OEM Hood Deflector :kp: :spam3: :spam1:Musubi
Image
User avatar
DSM_Lara
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1847
Joined: Fri Jan 22, 2010 1:37 am
Location: MAUI, HI 96732
Top

Re: Head Job ;D

Postby alltrac92 » Thu May 31, 2012 5:14 pm

I went with OEM wires and plugs.
User avatar
alltrac92
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 409
Joined: Mon Mar 10, 2008 10:12 pm
Location: Citrus Heights, CA
Top

Re: Head Job

Postby Solarasian » Thu May 31, 2012 6:32 pm

mig0s wrote:I read 'hand job' and was disappointed when I clicked the thread :P

i think mig0s wanted a handjob from you LOL :Fade-color
Image
Auto SLE V6
6000k VVME Bi-Xenon
GReddy SP2 catback
injen SRI is2030p
Kaminari Lip Kit(stand by)
Tokico hp Struts
Tein S Tech
User avatar
Solarasian
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 310
Joined: Wed Oct 06, 2010 3:07 pm
Location: Massachusetts
Top

Re: Head Job ;D

Postby DSM_Lara » Fri Jun 01, 2012 5:18 am

alltrac92 wrote:I went with OEM wires and plugs.

OEM it is, I guess $11 a piece per plugs won't hurt the pocket. :wink:
1999 Toyota Solara SE V6 (TRD Edition) Rare Greddy EvoII/CP-E Intake/Renova Grill/Black Housing Front/OEM Hood Deflector :kp: :spam3: :spam1:Musubi
Image
User avatar
DSM_Lara
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1847
Joined: Fri Jan 22, 2010 1:37 am
Location: MAUI, HI 96732
Top

Re: Head Job ;D

Postby alltrac92 » Fri Jun 01, 2012 6:58 am

90919-01194 spark plug I paid $6.31 a piece.
19037-20011 cost me 33.96 for the wire set.
User avatar
alltrac92
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 409
Joined: Mon Mar 10, 2008 10:12 pm
Location: Citrus Heights, CA
Top

Re: Head Job ;D

Postby Brandoe91 » Fri Jun 01, 2012 10:48 am

Magnecor race wires , if you plan on doing performance upgrades. I personally have Ngk's and have no complaints .
TRD S/C 6psi - OBX Full Exhaust - Injen intake ( 226whp untuned).

New Setup - 3mzfe - obx full exhaust - aem fic - innovate mtx-l wideband - Cpe intake. (Estimated 220whp) dyno numbers coming soon.
Brandoe91
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 290
Joined: Sat Sep 25, 2010 10:53 pm
Location: South Florida
Top

Re: Head Job ;D

Postby DSM_Lara » Sat Jun 02, 2012 4:57 am

alltrac92 wrote:90919-01194 spark plug I paid $6.31 a piece.
19037-20011 cost me 33.96 for the wire set.

Hawaii is more expensive :evil:

More stuff :D
25627-20010 EGR Gaskets
90480-18001 PCV Valve Grommet
90919-01194 Spark Plugs x6
19037-20011 Spark Wire/Cord Set
16261-20010 Water By-Pass Hose
16571-20020 Upper Radiator Hose
16572-20020 Lower Radiator Hose

TRD Stuffs I had on the side...
TRD Struts Brand New in Box with Tein S-Tech from Greg a while back
TRD RSB

Below I have is my Christmas Tree with all the goodies. :wink:
Image
1999 Toyota Solara SE V6 (TRD Edition) Rare Greddy EvoII/CP-E Intake/Renova Grill/Black Housing Front/OEM Hood Deflector :kp: :spam3: :spam1:Musubi
Image
User avatar
DSM_Lara
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1847
Joined: Fri Jan 22, 2010 1:37 am
Location: MAUI, HI 96732
Top

Re: Head Job ;D

Postby dinoxor » Sat Jun 02, 2012 7:35 pm

Maybe you should post up a tutorial when you're done ;)
User avatar
dinoxor
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 439
Joined: Wed Jun 02, 2010 6:04 pm
Location: Garland, TX
Top

Re: Head Job ;D

Postby JavaJoe_2 » Sun Jun 03, 2012 9:25 am

Really like those TRD struts. I should have bought those instead of the JIC's.
Got Boost?? :sweet:
JavaJoe_2
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1070
Joined: Fri Aug 20, 2004 7:21 am
Top
Next
Post a reply

Return to Forced Induction

Who is online

Users browsing this forum: No registered users and 23 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net