question -belt size
Posted: Mon May 30, 2011 11:46 amwhat size drive belt is needed when switching to a 2.9" (5.5 psi) supercharger pulley?
Page 1 of 1
Posted: Mon May 30, 2011 11:46 amRe: question -belt size
Posted: Mon May 30, 2011 6:05 pmRe: question -belt size
Posted: Mon May 30, 2011 10:34 pmhskrsolara wrote:http://www.solaraguy.com/viewtopic.php?f=23&t=51536&start=15
thanks for the reply-i read your thread earlier-does your supercharger have the dynamic tensioner? mine doesn.t and i believe that will affect the size of the belt that i will need?
Re: question -belt size
Posted: Mon May 30, 2011 10:40 pmWith out the non tensioner set up the belt is smaller.
Re: question -belt size
Posted: Sun Jun 12, 2011 9:35 pmHskrsolara says he used an 88.25" belt with his 5.5 pully.
I run a 5.5 pulley and auto tensioner, but I'm pretty sure I'm running a much smaller belt, I think somewhere between 87.2" and 87.7"
i'll check and get back to you.
I run a 5.5 pulley and auto tensioner, but I'm pretty sure I'm running a much smaller belt, I think somewhere between 87.2" and 87.7"
i'll check and get back to you.