SolaraGuy.com

DOO IIT!!!

Twin Turbo wrote:So after about a week of begging I think I finally have Gabe convinced to slap the 9 pound pulley on the supercharger. Now we will see how far an m90 can push a stock 1mz! Should have it on the dyno within the week hopefully.

Good luck and I hope Gabe would not be responsible if the engine fails lol

9 pound pulley installed on stock 1mz. Getting dynoed at Boston dyno tomorrow. Any predictions?

460whp

9 pound on stock i say... 333whp

lemegacool wrote:9 pound on stock i say... 333whp

don't forget he has 2 turbos lol

i thought gabe was running the m90 only for the first dynos...

Ya gabe has taken the TT system off and just put on the MP90 to run dyno tests for the kit for when he starts selling them!, Dyno set for tomorrow i think! WOOT WOOT, ive estimated 315WHP @ 5.5psi and 385 WHP @ 9psi

Turbos are unhooked and he's just gonna do one run with the 9lb pulley. The car will be running 330 injectors and water meth. Gabe wants to run it with basic mods and just the sc hooked up so he can show all you potential customers out there what his mp90 kit is capable of doing to a stock 1mz. After he gets some solid numbers established the fully built 3.3 engine goes in and the turbos get hooked back up.

im excited! i hope he can do a dyno run with:
1mz @ 5.5
1mz @ 9
3mz @ 5.5
3mz @ 9
3mz with SC and TT

its a lot of dyno runs but it would show and give us a huge perspective into what the MP90 can do on multiple platforms and setups!

just an idea though!

Whoops sorry guys. I had mentioned that gabe is gonna go with the 11.5 today for the dyno run but he has decided to stick with the 9. My mistake

WHOA! It better hit 380whp.

not to jinx it but hopefully it hits a number before the motor goes kaboom.

any updates??????

ToyoSolV6 wrote:not to jinx it but hopefully it hits a number before the motor goes kaboom.

hahah no1 wants to hear that. it is scary with stock tho