[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Dyno Prediction of my 3mz/1mz
Page 1 of 7

Dyno Prediction of my 3mz/1mz

PostPosted: Wed Nov 10, 2010 9:05 pm
by Gregtrd
Here's my mods list, let me know what you ladies think I'll put down WHP wise, I should be at least 300whp. Church's will be the place where I'll Dyno.

-3.3 3mz/1mz engine 9.8to1 compression
-Double stack MLS headgasket
-ARP head bolts torque @ 85 ft.lbs
-URD Crank pulley
-Trd Supercharger 9psi (2.2)
-Injen/UPFD extension
-8.5mm Magna core wires
-JPP headers
-3" OBX cat back
-MSD DIS 4
-Split sec. FTC-1
-Zitronics wideband
-Snow Performance water/meth injection 625ml nozzle
-Fidenza flywheel
-Spec clutch stage 2
-TRD thermostat
-TRD radiator cap
-return style fuel setup with supra FPR
-walbro 255 fuel pump
-IK22 plugs
-330cc supra injectors
-supra maf sensor
-GM knock sensors
-O2 sim
-split sec esc1
-yellow top optima battery
-jet performance throttle body spacer
-KAAZ LSD 1.5
-TWM short shifter
-Greddy weighted shift knob
-Jims torque rod
-rear soild engine mount
-24mm Front and 20mm rear whiteline sway bars
-front lower control arm energy suspension bushings
-rack & pinion superpro bushing
-Dog bone superpro bushing
-rear tailing arm energy suspension bushings
-Jic coilovers
-Stop Tech BBK 4 piston calipers and 13" rotors two piece
-17x8 TSW Revos 235/45/17 DZ101 Dunlops tires
-TRD lip kit.

Well I still have more to add to the list but not important to the dyno tune. I got a little carried away with the list already.
Image
Image
Image

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Wed Nov 10, 2010 9:10 pm
by mig0s
I'm sure it's gonna be 312whp, for the torque, I'll take a guess, 301.

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Wed Nov 10, 2010 9:14 pm
by albertrd
where is the big stock power playas :think: Fergi.

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Wed Nov 10, 2010 9:19 pm
by SleeperSolara
:o

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Wed Nov 10, 2010 11:04 pm
by sarki
Im going to put down 302 WHP with my 3.0 Auto beeaatch! BTW who the hell is Fergi???? He aint no Power Playa!!!! OH Shizzle.

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Thu Nov 11, 2010 1:06 am
by DSM_Lara
lol

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Thu Nov 11, 2010 11:01 am
by Gregtrd
DSM_Lara wrote:lol


your solara looks clean.

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Thu Nov 11, 2010 11:10 am
by crispone
What fuel are you running???

On pump (93) or up to 100 octane or so, I'd put you at:

290rwhp +- 5% (approx. 275~305)


Purely speculative... but based on what OTHERS have achieved with similar array...


Good luck!



-crisp :evilbat:

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Thu Nov 11, 2010 11:15 am
by mig0s
crispone wrote:What fuel are you running???

On pump (93) or up to 100 octane or so, I'd put you at:

290rwhp +- 5% (approx. 275~305)


Purely speculative... but based on what OTHERS have achieved with similar array...


Good luck!



-crisp :evilbat:


Don't forget that he's a 3.3L, not 3.0 :P

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Thu Nov 11, 2010 11:55 am
by Gregtrd
crispone wrote:What fuel are you running???

On pump (93) or up to 100 octane or so, I'd put you at:

290rwhp +- 5% (approx. 275~305)


Purely speculative... but based on what OTHERS have achieved with similar array...


Good luck!



-crisp :evilbat:


I'm going to run 95.1 octane. mixing 3.5gals of 110 and 12.5gals of 91 to get 95.1octane. also not running any cats.
Ive set up bbq bobs and franks(jetbk) camry/solara. Im running the parts they got and some. frank and bbq bob run 94.5octane
I might run 97octane but not sure if its necessary.

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Thu Nov 11, 2010 11:58 am
by crispone
mig0s wrote:
crispone wrote:What fuel are you running???

On pump (93) or up to 100 octane or so, I'd put you at:

290rwhp +- 5% (approx. 275~305)


Purely speculative... but based on what OTHERS have achieved with similar array...


Good luck!



-crisp :evilbat:


Don't forget that he's a 3.3L, not 3.0 :P



Add 10% of absolute displacement increase ratio accordingly:

3.0/3.3=8.1% displacement increase x 10% = 0.81% absolute increase = 275~305 x 100.81 = 277~308


CORRECTION VALUE for 3.3l -vs- 3.0l:

277rwhp ~ 308rwhp :wink:



-crisp :evilbat:

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Thu Nov 11, 2010 12:04 pm
by crispone
Gregtrd wrote:
crispone wrote:What fuel are you running???

On pump (93) or up to 100 octane or so, I'd put you at:

290rwhp +- 5% (approx. 275~305)


Purely speculative... but based on what OTHERS have achieved with similar array...


Good luck!



-crisp :evilbat:


I'm going to run 95.1 octane. mixing 3.5gals of 110 and 12.5gals of 91 to get 95.1octane. also not running any cats.
Ive set up bbq bobs and franks(jetbk) camry/solara. Im running the parts they got and some. frank and bbq bob run 94.5octane
I might run 97octane but not sure if its necessary.



I feel pretty good about my guesstimate. Of course... do you have any STICKERS on the car??? 8)



-crisp :evilbat:

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Thu Nov 11, 2010 12:06 pm
by Gregtrd
crispone wrote:
Gregtrd wrote:
crispone wrote:What fuel are you running???

On pump (93) or up to 100 octane or so, I'd put you at:

290rwhp +- 5% (approx. 275~305)


Purely speculative... but based on what OTHERS have achieved with similar array...


Good luck!



-crisp :evilbat:


I'm going to run 95.1 octane. mixing 3.5gals of 110 and 12.5gals of 91 to get 95.1octane. also not running any cats.
Ive set up bbq bobs and franks(jetbk) camry/solara. Im running the parts they got and some. frank and bbq bob run 94.5octane
I might run 97octane but not sure if its necessary.



I feel pretty good about my guesstimate. Of course... do you have any STICKERS on the car??? 8)



-crisp :evilbat:

stickers?

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Thu Nov 11, 2010 12:12 pm
by trd4life
greg i think if the compression drop doesn't affect you too much that 333whp is possible.

Re: Dyno Prediction of my 3mz/1mz

PostPosted: Thu Nov 11, 2010 12:14 pm
by Gregtrd
frank and bbq bob are running 7lbs and a 375ml nozzle of water/meth and I'll be running 9lbs with a 625ml nozzle water/meth. sarki is running 550ml meth nozzle with no quenching.