For you Diehard Members Awaiting My MP90 Supecharger Kit

[trd4life]

\Ok heres the deal, i need the serious guys to step up. I have an investor that helped me purchase several of these MP90 superchargers last year on a clearance blowout sale. Because my supercharger is not ready for release, my investor is getting antsy and wants a return on his investment. Which means at this time i need to pay off the supechargers or will be unable to continue with the project due to extremely high interest i am paying on the blowers!


I will be making 12 of these custom supercharger kits total. Pricing is set at $3500-$3700 (this price is a GUARANTEE) per kit which will include a New MP90 Magnuson Supercharger capable of 450whp, a one off hand made s/c intake manifold, Idler plate assembly and hardware, supercharger belt, Quick Change S/C pulley Hub w/ 1 S/C Pulley, Size is your choice, and as an added bonus like i promised you will be receiving a walbro 255 fuel pump and a used set of the return style fuel rails from an earlier 1m-fe engine.. This will be a complete bolt on kit. Modification to your OEM hood will be required. A 1" to 1.5" Hood Scoop will be required for blower clearance. I cannot make any guarantees that the TRD strut bar will clear the blower without modifiying it, i may offer a strut bar modification service though.

For the 12 people that want in 100% and want to be GUARANTEED a kit, i am requesting a $555 + 2.9% paypal fees Deposit by August 1st. This will allow me to pay off my initial investment on the blowers and finish this project.

I greatly apologize to the guys that wanted to wait for dyno #'s before dropping any cash on this, I understand where you are coming from, the only thing i can say is that my prototype is a work of art and you guys will not be dissapointed.


Ok guys on with the list. If you have any TECH questions before you pay, call me anytime today! 2072298666. I currently have 9 openings left. Remember guys , this is a one shot deal. I am not going to have the resources to make any more kits after this first run.

This kit is was mainly designed for the guys that already have done everything else to their car and are ready for an upgrade,BUT , it could be used as a substitute for the rare aging TRD s/c kit and run at low boost.




List of people that have paid the $555 Downpayment

1) Frank aka Jetbtkng PAID
2) Frank aka jetbtkng PAID
3) Doug Lila AKA Squatch197 Pending Payment



Thanks for everyones support !!!!!!!!

-Gabe


Manifold will look similar to this and WILL BE POWDERCOATED BLACK

[SirThomas88]

lol.

im really curious

[trd4life]

yes exactly. Its very important that i hear from each and every one of you if your are interested in this kit.

thanks

gabe

[Solarizona]

Why not just post it?

[SirThomas88]

Why not just post it?

I'm sure it has something to do with trade secrets. He's got to protect his investment after all. He can't be giving out the secret to his master plan willy-nilly now.

[trd4life]

Ok heres the deal, i need the serious guys to step up. I have an investor that helped me purchase several of these MP90 superchargers last year on a clearance blowout sale. Because my supercharger is not ready for release, my investor is getting antsy and wants a return on his investment. Which means at this time i need to pay off the supechargers or will be unable to continue with the project due to extremely high interest i am paying on the blowers!


I will be making 12 of these custom supercharger kits total. Pricing is set at $3500-$3800 (this price is a GUARANTEE) per kit which will include a New MP90 Magnuson Supercharger capable of 450whp, a one off hand made s/c intake manifold, Idler plate assembly and hardware, supercharger belt, Quick Change S/C pulley Hub w/ 1 S/C Pulley, Size is your choice, and as an added bonus like i promised you will be receiving a walbro 255 fuel pump and a used set of the return style fuel rails. This will be a complete bolt on kit. Modification to your OEM hood will be required. A 1" to 1.5" Hood Scoop will be required for blower clearance. I cannot make any guarantees that the TRD strut bar will clear the blower without modifiying it, i may offer a strut bar modification service though.

For the 12 people that want in 100% and want to be GUARANTEED a kit, i am requesting a $555 + 2.9% paypal fees Deposit by August 1st. This will allow me to pay off my initial investment on the blowers and finish this project.

I greatly apologize to the guys that wanted to wait for dyno #'s before dropping any cash on this, I understand where you are coming from, the only thing i can say is that my prototype is a work of art and you guys will not be dissapointed.


Ok guys on with the list. If you have any TECH questions before you pay, call me anytime today! 2072298666. I currently have 9 openings left. Remember guys , this is a one shot deal. I am not going to have the resources to make any more kits after this first run.

This kit is was mainmly designed for the guys that already have done everything else to their car and are ready for an upgrade, OR, could be used as a substitute for the rare aging TRD s/c kit


List of people that have paid the $555 Downpayment
1) Frank aka Jetbtkng PAID
2) Frank aka jetbtkng PAID
3) BBQ Bob PAID


Thanks for everyones support.

-Gabe


Manifold will look similar to this. If you want yours powdercoated let me know and i will check to see what the cost will be.

[ToyoSolV6]

Good luck Gabe if i had the funds at the moment i would do it!
Either way ill still go to Franks house to admire the s/c

[SirThomas88]

It's too bad you're not a rich man Gabe and have $10,000 laying around to finish up these sweet M90's in advance.

Hopefully everyone who wants one of these will realize that.

Considering your high reputation and trust, I expect it shouldn't be too much trouble to get people to commit.

[TxBmbleBee]

Unbelievable, I guess I thought squatch was done with this platform and moved on. I wonder what he has up his sleeve?

[GreeKAvaLoN]

gabe, i'm working on getting some funds together for the downpayment. its rough with the time frame you think you can give doug my num to give me a call sometime? maybe he can help me out a bit with all these things =P

[99BlackSandv6]

So tempting. If I get some logistics worked out, I'll get back to you.
One major question I have...how long before the kits are ready to go
after you get $555? I mean, if you get $555 from me by the 1st, will
it be next summer, this fall, a month from now? When will the kits be
ready to go, and how long will we have to pay in full?

[trd4life]

I hate to give definate dates because you never know whats going to happen , like last summer when my machinist had a stroke . The plan is that before the end of 2010 this project will be completed and have kits ready for shipping for people that choose to pay the total price at that time. If people interested in payment plans and could have their kits completely paid off by next June/July 2011, then i would do payment plans starting now , Once your charger kit is paid off, Your kit is shipped.


I cannot stress how super custom these are. I am doing 1 Limited production run, 400whp capabilities.


Feel free to call me if you guys have any questions.

300whp will be achieved at very low boost levels with this kit. Yes you can run this on a stock 1mz if your engine is healthy.

-gabe

[99BlackSandv6]

That definitely answers my question. Now I need to do some thinking.
My brain is saying no...my heart is saying yes.

[KILLA CAM]

Good luck Gabe!

[GreeKAvaLoN]

That definitely answers my question. Now I need to do some thinking.
My brain is saying no...my heart is saying yes.

think with your dipstick!