EGR valve - Insufficient egr flow
So when i put on the supercharger, i just modified my stock egr pipe initially to fit. I initially thought that was the reason for my CEL for insufficient egr flow since one end was kinda pinched off where i bended it to make it fit. I eventually found an auto egr pipe and the CEL still came back. The car idled really low too and started to shake every time i was at a stop on D so i always popped the car into neutral.
Now I just replaced the entire egr valve after buying one for 160$ and it still came back. The idle is back to normal though.
In fact in the process, I must've done something else cuz I also have the "system too lean - bank 1" code.
Now I just replaced the entire egr valve after buying one for 160$ and it still came back. The idle is back to normal though.
In fact in the process, I must've done something else cuz I also have the "system too lean - bank 1" code.
Blown @ 5.5PSI w/ xerd, 3inch jpp, tunable cpe Automatic... SOLD
2010 Mazdaspeed 3 ZOOM-ZOOM B)
2010 Mazdaspeed 3 ZOOM-ZOOM B)
-
99V6solaraSE - SolaraGuy Street Racer
- Posts: 1016
- Joined: Tue Jul 06, 2004 6:31 am
- Location: Jacksonville/Gainesville