Tapping off of SAFC Wiring?
Hey guys,
i'm working on installing the innovate lm-2 on my car. As of right now all i plan to hook up are the rpm and tps wires. These are the same wires that i have already tapped into with the SAFC II.
My question is can i now jus splice into the SAFC wires since they are easier to get to? I would do this just for the positive side of the rpm and tps signals. I plan to run the ground on the actual wire from the car apart from the two places where the SAFC splices into.
Thanks,
Michael
i'm working on installing the innovate lm-2 on my car. As of right now all i plan to hook up are the rpm and tps wires. These are the same wires that i have already tapped into with the SAFC II.
My question is can i now jus splice into the SAFC wires since they are easier to get to? I would do this just for the positive side of the rpm and tps signals. I plan to run the ground on the actual wire from the car apart from the two places where the SAFC splices into.
Thanks,
Michael
- 20SoLaRa02
- SolaraGuy Driver
- Posts: 553
- Joined: Tue Jul 16, 2002 1:06 pm
- Location: Upland, CA.....So Cal