Posted: Thu Sep 17, 2009 5:51 pmwill do
Page 3 of 5
Posted: Thu Sep 17, 2009 5:51 pmPosted: Sat Sep 19, 2009 4:54 pmDo you guys think the stock ECU would be able to compensate for like 3.5psi of boost?
Posted: Sat Sep 19, 2009 9:40 pmhmmm.. Im not sure, ill say it will as long as you have a different map sensor. You will need to get the fuel and timing straightened out but you should be able to get it started with that amount of low boost. You can PM Tacti, he has successfully completed this project with tons of miles.
Posted: Sat Sep 19, 2009 10:41 pmDriver2g wrote:Do you guys think the stock ECU would be able to compensate for like 3.5psi of boost?
I would ask around the TC forums
Posted: Sun Sep 20, 2009 1:57 pmyour car should be able to handle 8 psi no problem w/ the fic
Posted: Wed Sep 23, 2009 6:57 pmAlmost there 
Posted: Wed Sep 23, 2009 7:07 pmNice progress!
Keep up the good work!
Keep up the good work!
Posted: Wed Sep 23, 2009 7:14 pmdosent even look like a 2az anymore!! great job man, cant wait to hear what the HP gains are!!
Posted: Wed Sep 23, 2009 7:27 pmbeautiful!!! you should see if possible to get an elbow for the filter and turn it towards the battery..
Posted: Thu Sep 24, 2009 6:31 amLooking very nice!
Posted: Thu Sep 24, 2009 3:14 pmgood work. Since that vacuum manifold is going on the brake booster line, you should run the wastegate reference line BEFORE the throttle body
Posted: Thu Sep 24, 2009 5:55 pmLOoks StoUt!
Posted: Thu Sep 24, 2009 6:15 pmIt's ALIVE 
Have a small exhaust leek, but will take care of that tomorrow. Blow-off valve sounds great even at only
3.5psi.
Have a small exhaust leek, but will take care of that tomorrow. Blow-off valve sounds great even at only
3.5psi.
Posted: Thu Sep 24, 2009 6:30 pmDriver2g wrote:It's ALIVE
Have a small exhaust leek, but will take care of that tomorrow. Blow-off valve sounds great even at only
3.5psi.
Video
Posted: Thu Sep 24, 2009 7:31 pmMidias wrote:Driver2g wrote:It's ALIVE
Have a small exhaust leek, but will take care of that tomorrow. Blow-off valve sounds great even at only
3.5psi.
Video
yes, this. And some WOT passes too
Congrats on gettin it done