TRD4life Return Style Fuel System Pics :)

by **trd4life** » Thu Jun 04, 2009 8:00 am

Hey guys, These are pics of a set of Gen 3 1994 Camry V6 return style fuel rails bolted up to my 1999 Solara V6 lower intake manifold. They fit perfect. I also added a -6 feed line as you can see in the pics. I'm gonna try to source a few more sets of these to sell on the forums so if your interested PM me.

I'll be using this setup on solara for the M90 supercharger kit, with the biggest advantage being i can hook up a rising rate fuel pressure regulator on the return line if i need more fuel .

Ill post pics of the modified fuel pump hanger here shortly.

by **trdkamuri51o** » Thu Jun 04, 2009 8:51 am

finally a possible solution for fuel shortages without having to do extra upgrades

by **1gSE** » Thu Jun 04, 2009 9:04 am

Nice work. mmmm....M90. I've seen some used on ebay for like 200 bux, and some for even less. Definitely want to see what the 1mz will put out with one

by **ASG14** » Thu Jun 04, 2009 9:09 am

trdkamuri51o wrote:finally a possible solution for fuel shortages without having to do extra upgrades

You still need to upgrade stuff. Still need the custom fuel line and filter. Still need the line to run to the gas tank.

by **Mole** » Thu Jun 04, 2009 9:09 am

is there enough pressure?

by **ASG14** » Thu Jun 04, 2009 9:14 am

^ It essentially turns the Gen 4 into a Gen 3 fuel setup, which means you can run the 255 Walbro pump for more pressure.

by **trd4life** » Thu Jun 04, 2009 1:15 pm

This isnt your average M90 S/C you see on ebay, this is a 4th gen MP90 which makes +20hp with the same sized pulley over the older ones, oh and these are brand new not used.

by **lilm** » Thu Jun 04, 2009 2:32 pm

i will be buying one gabe!!!

by **chullen1** » Thu Jun 04, 2009 9:17 pm

Nice fuel setup, gabe. I was wondering will this be included at an extra cost for those M90 kits your making

by **TxBmbleBee** » Sun Jun 14, 2009 8:12 pm

how hard are these gonna be to install?

i dont like to go to mechanics :drinking:

by **Dawgz** » Sun Jun 14, 2009 8:18 pm

lilm wrote:i will be buying one gabe!!!

My only question is, is the hole for the turn line drilled into the tank, or the top cap where the fuel pump sits in?

by **trd4life** » Mon Jun 15, 2009 1:12 pm

top cap where the fuel pump sits in

by **chullen1** » Fri Jun 19, 2009 6:23 pm

how the supercharger retofit going really want one but need to know how it fits

by **trd4life** » Fri Jun 19, 2009 6:51 pm

still working on it my fabricator is overworked and VERY busy

by **Akfahad** » Fri Jun 19, 2009 7:38 pm

^^^calling you tomorrow Gabe...got something in mind

TRD4life Return Style Fuel System Pics :)

TRD4life Return Style Fuel System Pics :)

Who is online