[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - My Project V6 Turbo Camry (1MZ-FTE) [Nitrous Work page 8]
Page 6 of 9

PostPosted: Mon Apr 06, 2009 11:03 pm
by hksboost
Thanks for the nice comments everyone.
As soon as I get time I will try to post some nice videos and also some nice racing videos of my Camry.

trd4life
In fact I considered the Supra TT MAF but it is very difficult to find one here in my country because of this I decided to custom made it.

Eye8Pussies
I am using Nitto 555 225/35/18

TxBmbleBee
It was not that hard of a Job to install the Kaaz LSD but I face a problem with the speed meter gear and its sensor since the LSD is for Turbo MR2, so you have to get them from MR2 or you can leave it but the speed gauge will not work and the check engine light will be on; only the rpm gauge will work.

PostPosted: Wed Apr 08, 2009 8:50 am
by hksboost
Some engine pics

Image

Image

Image

Image

Image

Image

Image

PostPosted: Wed Apr 08, 2009 8:58 am
by trd4life
BADASS!!!!!! Do you have aftermarket camshafts in that engine?

PostPosted: Wed Apr 08, 2009 9:34 am
by gnegroni
Now...

How about a video for us to drool over?

PostPosted: Wed Apr 08, 2009 9:51 am
by mazen222
daammmnnn... 470 hp !! Put some wings on the side of your car and you might lift off

PostPosted: Wed Apr 08, 2009 10:02 am
by 1gSE
SWEET! Does your downpipe go under the drivers side of the tranny? I can't tell from the pix

PostPosted: Wed Apr 08, 2009 10:40 am
by hksboost
Thanks for the nice comments everyone.

trd4life
No, I am using stock cams

gnegroni
As soon as i get time i will post some videos

1gSE
Yes, the downpipe go under the driver side of the tranny

PostPosted: Wed Apr 08, 2009 4:05 pm
by 1gSE
great! that takes the guess work out of mine since i was wondering if it would go that way

PostPosted: Thu Apr 09, 2009 7:14 am
by akora12
Nice work, that thing is a beast! Any dyno vids?

PostPosted: Thu Apr 09, 2009 8:31 am
by Midias
Awesome looks great

PostPosted: Thu Apr 09, 2009 9:34 am
by JamesT
I like that you were still able to keep the cruise control. Everything is looking really good.

PostPosted: Thu Apr 09, 2009 12:48 pm
by hksboost
Thanks for the nice comments everyone.

On the Dyno

http://www.youtube.com/watch?v=qD8rCI_L-rQ

PostPosted: Thu Apr 09, 2009 1:58 pm
by rollaevo99
sweet!!!!!!!!!!!!

PostPosted: Thu Apr 09, 2009 2:48 pm
by gnegroni
Sounds pretty awesome...now a street video!

PostPosted: Fri Apr 10, 2009 1:04 pm
by TMMK Toy
The link just keeps loading. Hopefully just a temp. issue with youtube.