[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - My Project V6 Turbo Camry (1MZ-FTE) [Nitrous Work page 8]
Page 5 of 9

PostPosted: Mon Apr 06, 2009 12:27 pm
by hksboost
Hi everyone
I will start from where I stopped last time. I installed the SPEC stage 5 clutch, the Kaaz LSD, the Tokico blue gas shocks and the Eibach springs and after breaking in the new clutch up to 300 mile I decided to go for dyno test but before that I changed the stock MAF pipe to a modified 3 inch pipe for more air flow and response.

At the dyno:

The new upgrades result in to two things:
-The first thing is a lose of 16 hp at the top end of rpm
-The second one is a gain of more than 60 hp at the mid rpm (from 4500 to 5500 rpm)
All the runs was done at 20 psi and C16 race fuel and the numbers are :

471 Whp and 467 lbft
I am satisfied with these numbers since there is no more spin of tiers and they are sticky as hell. The car is a freaking beast and up to now I am trying to get used of it with this amount of power and sticky tiers.

Here are some pics:

The modified MAF

Image

On the dyno

Image

The dyno Sheet

Image

PostPosted: Mon Apr 06, 2009 12:45 pm
by GzNutz
That gain of 60 at the mid must make a world of difference while driving. Also I can't help but notice how huge that area under both curves is. Congrats on the great dyno!

PostPosted: Mon Apr 06, 2009 12:45 pm
by D-money
daaaaaaaaaaammmmmmmmmmmm

PostPosted: Mon Apr 06, 2009 1:01 pm
by Biggi_e
thats crazy. post some new vids if u can of this beast

PostPosted: Mon Apr 06, 2009 1:26 pm
by funboy102
haha, that is absolute insane. You have more than twice the horsepower as stock!!!

PostPosted: Mon Apr 06, 2009 1:30 pm
by Akfahad
very nice!

PostPosted: Mon Apr 06, 2009 1:39 pm
by .onetohate
fkn bad ass.

PostPosted: Mon Apr 06, 2009 1:45 pm
by CamryOnBronze
Awesome numbers, props!

PostPosted: Mon Apr 06, 2009 1:59 pm
by trd4life
VERY impressive! I like the modified MAF housing :D alot of the Nissan guys do that with great success. Did you consider the Supra TT MAF?

PostPosted: Mon Apr 06, 2009 3:44 pm
by Eye8Pussies
wow...great numbers and graph!


what tires are you running on that are so great that they don't spin with that much power?? slicks??

PostPosted: Mon Apr 06, 2009 5:08 pm
by SleeperSolara
:o
Very nice man.

PostPosted: Mon Apr 06, 2009 5:38 pm
by D-money
I wanna ride

PostPosted: Mon Apr 06, 2009 6:31 pm
by 1gSE
lol thats gonna make my set up look weak. Nice work!

PostPosted: Mon Apr 06, 2009 7:00 pm
by TxBmbleBee
nice...how hard of a job was it to install that lsd?

PostPosted: Mon Apr 06, 2009 7:06 pm
by Ilovemylara
amazing!