GM KNOCK SENSOR DISCONTINUED...?

[krook]

Twosrus.com no longer makes the GM knock sensor. anyone have the part number so i can look it up elsewhere?

if i can't find a GM knock sensor, what would be an alternative solution?

[CASTRO]

wow they are gone now? Good thing I bought me a spare GM + adapter and a spare oem.

[Eye8Pussies]

relocate your sensor

[Paladin06Greg]

Also Greddy sells a component that works great with the OEM sensors.

[krook]

Also Greddy sells a component that works great with the OEM sensors.

what's it called?

[Paladin06Greg]

Try this.

http://www.mohdparts.com/emanage/index. ... AGE%20BLUE

and see below


I have one I'm not using.


GReddy e-manage Knock Sensor Adapter #1 - #15900903 ONLY $19*
Prevents retarded timing overcompensation by the ECU in response to the knock reading. Wire to the knock sensor and ground.
Can be used with 6 cylinder and vehicles with two knock sensors, as well.
English Japanese





GReddy e-manage RPM Signal Extraction Adapter #1 - #15900904
For cars with no RPM signal (such as those utilizing the Nissan CAN communication system, this adapter will extract rpm information from the spark signals. Wire into each of the ignition signals on the ECU side as well as the ground.
Can be used with cars possessing up to 6 cylinders.
English Japanese

Also Greddy sells a component that works great with the OEM sensors.

what's it called?

[shocar4]

has anybody varified if this is a fix to knock sensor problems?

Try this.

http://www.mohdparts.com/emanage/index. ... AGE%20BLUE

and see below


I have one I'm not using.


GReddy e-manage Knock Sensor Adapter #1 - #15900903 ONLY $19*
Prevents retarded timing overcompensation by the ECU in response to the knock reading. Wire to the knock sensor and ground.
Can be used with 6 cylinder and vehicles with two knock sensors, as well.
English Japanese





GReddy e-manage RPM Signal Extraction Adapter #1 - #15900904
For cars with no RPM signal (such as those utilizing the Nissan CAN communication system, this adapter will extract rpm information from the spark signals. Wire into each of the ignition signals on the ECU side as well as the ground.
Can be used with cars possessing up to 6 cylinders.
English Japanese

Also Greddy sells a component that works great with the OEM sensors.

what's it called?

[krook]

maybe i should just relocate my knock sensors. how did everyone else do theirs?

[DatSRBoi]

maybe i should just relocate my knock sensors. how did everyone else do theirs?

http://www.solaraguy.org/viewtopic.php?t=30847