[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - supra ct26

Skip to content

For those looking for more speed through force. Forced Induction; Supercharger,Turbocharger or Nitrous discussion and maintenance.
Post a reply

supra ct26

supra ct26

Postby jcmiral » Fri May 19, 2006 7:29 pm

i just got a supra ct26 turbo for my setup but i need to turn the compressor housing so that it points in a different direction than my engine block, lol!! if i do that then i would need a external wastegate which is in my other post. thanx.

BRYAN
jcmiral
Just Licensed SolaraGuy
 
Posts: 15
Joined: Sun Mar 12, 2006 8:45 pm
Location: NEW YORK
Top

Postby Mandarinsolara » Thu May 25, 2006 12:11 pm

you are better off with a clipped ct20
Mandarinsolara
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1351
Joined: Thu Oct 14, 2004 1:41 pm
Location: Jacksonville, FL
Top

Postby jcmiral » Thu May 25, 2006 7:44 pm

the ct is just going to be for breaking in the motor after that it will be a garrett gt2871r.....
jcmiral
Just Licensed SolaraGuy
 
Posts: 15
Joined: Sun Mar 12, 2006 8:45 pm
Location: NEW YORK
Top

Postby Koala » Tue Jun 27, 2006 8:53 am

You can avoid clocking the turbo by making a flange to relocate the wastegate. Something similar to this:
http://www.alltrac.net/phpBB3/viewtopic ... c&start=30
MCV20

Image
Koala
Just Licensed SolaraGuy
 
Posts: 26
Joined: Tue Jun 27, 2006 7:50 am
Location: Some place warm :-)
Top

Postby Node » Sun Nov 19, 2006 10:47 am

Yup, I just went to Home Depot and bought some aluminumummm flat bar and made an adapter bracket to relocate the actuator. Dont forget there is a pin in the turbine housing that sticks into the center section to keep the housing from turning. You will need to remove that.
Why do my transmissions turn to slush? Oh yea,

3.4L 5VZ-FE V6, 60 Trim T4/T3, A2W supercooler, Port ethanol injection, MS2-R3, EDIS etc...
Node
Just Licensed SolaraGuy
 
Posts: 3
Joined: Sun Nov 19, 2006 10:22 am
Top
Post a reply

Return to Forced Induction

Who is online

Users browsing this forum: No registered users and 14 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net