idle question

[goldentoy]

i started my car after installing the sc and it idles at 200 rpm and my injen intake is really sucking in air. you can hear a slight beep in the car too. the car stays at that range but no check engine light. just when i thought i was in the clear. also i was wondering if it is a knock sensor problem. can you actually have a blown sensor without a check engine light on your car? thanks in advance for any help

[SC V6]

the car is going to take a bit to get used to the S\c... its just adjusting to the new addition.. in good time it will run like it used 2 (idle normal)

[goldentoy]

thanks man for info. s/c equal big time stress hahah

[SC V6]

I know exactly that you mean... you just want to make sure everything runs perfect... it worried me a lot when I did mine also

[Paladin06Greg]

It can take as much as ten days for the computer to reset itself to the SC. Just go easy on it for a little bit.

thanks man for info. s/c equal big time stress hahah

[Hsakuragi]

200 rpm??

[SC V6]

could be a vacuum leak 2.. by the way

[goldentoy]

yep it was a vacum leak. on the install when you cut the iac hose i didnt reconnect with the one way valve. i just left it hanging with the plastic tip. also the hose going to the egr pipe and the one on the s/c i switched. dam im a noob. i was trippin this whole morning now im all g. i give u guys props for helping me out.