s/c oil

[Dawgz]

118ml is what you want to put in there. AKA 4once.

Ive changed mine every 5K mile so thats what I remember.
SC have to be taken out unless you want to hassle the trouble filling it up.
Remember to torque it back up like you would with rims in a star like pattern.


good luck.

u know that it has a drain/fill hole rite?

Yes but if you want to fill it back up in the position its at good luck. I rather take the SC out and save me the pain (saves me a good 20 minutes and less mess. Also gives you a chance to clean up the SC) then having to do it at the angle the refill hole is at.

no no, i ment using that hole when the s\c is out, i dont think u can do the oil change with the s\c installed, it would be very tricky/hard if not impossible.

[20SoLaRa02]

thanks a lot guys. i'm going to redrain it again and then fill it with 4 ounces.

THANKS,
Michael

[facevedo17]

don't leave out breaking the actuator bypass in the process aswell

[Dawgz]

don't leave out breaking the actuator bypass in the process aswell

wat do u mean?

[facevedo17]

when you tilt the SC unit to filled it up wit oil you have to be careful thats all ....Thats why Dats prob ends up removing it for mor clereance you do this a couple of times and installing /removing SC will become easy task