Installing a new belt!

[siennasc98]

It's a nice day in NorCal today, I installed a new dynamic belt tensioner and
a new Dayco Poly-Cog (5060895 - 89.5" belt. The original set are ~ 3.5-years old (~ 40K miles). Remove the idler plate using a 8mm allen head socket.


While the upper cowl assembly (only on a Sienna) is removed, I installed the (Tacoma) TRD boost gauge that I had for a while.



I also installed a used 100-amp alternator that came from (32Kmiles) 01 Highlander (1MZFE engine).

[QuickSEV6]

Very nice, but while you were in there you should have also changed the oil in your supercharger. You can find the oil change kit here:
http://www.trdparts4u.com/

[siennasc98]

Very nice, but while you were in there you should have also changed the oil in your supercharger. You can find the oil change kit here:
http://www.trdparts4u.com/

Thanks for link and reminder.

Yes, I did the S/C oil change last year at 30K miles when I replaced the stock pulley with 2.9"- 5.5 psi.

PTR01-06020-37 TRD Supercharger Oil Change Kit for the V6 3.0L