trd ebc and gen4 ecu info

[wagonsrule]

Okay gen4 guys who are supercharged I need your info for creating a circuit to control the EBC of the trd supercharger to modify it for a gen3. I need to know what kind of voltages are being given out of the ECU at pin 11 of connector E10 (The wire that is grounded on the EBC when you have a manual transmission). It's a air-fuel sensor map out of the ECU and I need to know what the EBC detects. (0-5V with 0V at shifts?)

This data will make possible for any gen3 to use the TRD EBC on an automatic transmission since I will build a circuit that is controller by microprocessor to detect the gear changes and cut boost at every gear change. The gen3 does not have this circuit and any info would be helpful (Gabe could not help me! )

[wagonsrule]

Any info guys? You don't need to be s/c'ed to get this info any gen4 data would be awesome.

[solaraqueen]

most of us dont use them well the hi hp guys, i havent had them hooked up for a couple of yrs now & no problems....

[wagonsrule]

Yeah I know most of you guys don't use it. I was just wondering what kind of output the ECU gives out at pin 11 of E10 since that's where the EBC plugs in on the Gen4 and is not used in manual transmissions. I just wanted to create my own circuit that detects gear changes and cuts boost at the time of shift. Thanks anyways if nobody knows.

[SirThomas88]

Huh.. interesting. I should be working on my car today, I'll try and get a voltage reading for you.

[wagonsrule]

No info? Well, I just bought a charger so I'll make my own test when the time comes.