Will an Auto SC work with a manual?

by **99V6solaraSE** » Wed Mar 19, 2008 8:11 am

Gregtrd wrote:
badbeaumont wrote:Also the kit didn't come with a TRD strut tower connector, will the stock one clear the SC? all the sc'd Solaras I've seen have the taller bar.

Ill pm ya YESCA when I figure out what im gonna do about a manual tube, might have to do some cutting and welding to this one .

no need for cutting egr tube, heres a solution that i have not reviled, between the egr tube and the engine block there is a plate the cools down the exhuast gases. replace that plate with an auto one and the manual egr will bolt up perfect. im running a auto egr tube with my manual trany.

hmm what plate is this? cuz i fitted my stock egr pipe right on by heating it up. I didnt notice any plate. maybe this could explain why i keep getting the insufficient egr flow code

by **Dawgz** » Wed Mar 19, 2008 9:42 am

CamryOnBronze wrote:Mine was the 103 as well- I wasnt sure if it was meant for the sienna or something since my supercharger kit was for the sienna, but it worked on my manual just fine- functions properly. Part of me wonders if they revised it at some point to be compatible for both depending on wiring connections.

Either way, you should be fine. I remember freaking out because the wires werent quite the same as the instructions and the part number didnt match, but it worked fine in the end.

u wanna trade? i have the 102.

by **CamryOnBronze** » Wed Mar 19, 2008 10:30 am

^ haha not really, mine is in the car working fine- dont have any reason to rip it all out.

by **Gregtrd** » Wed Mar 19, 2008 11:47 am

hmm what plate is this? cuz i fitted my stock egr pipe right on by heating it up. I didnt notice any plate. maybe this could explain why i keep getting the insufficient egr flow code[/quote]

the plate is bolted on to the engine block, thats where you bolted the egr tube you heated.

by **badbeaumont** » Wed Mar 19, 2008 1:33 pm

Is the plate a just a plate or do you have to replace the whole erg cooler?

by **akora12** » Wed Mar 19, 2008 2:41 pm

First off, I apologize for the quality of this photo but it was all I had. This picture was taken directly under the cat looking up. The large white blob in the left corner is the tranny.

Greg, is this the plate you're referring to? Mine had an "M" stamped on it.

by **akora12** » Wed Mar 19, 2008 3:35 pm

I finally found a diagram. It's #6 in the photo and it's called the "egr cooler." Unfortunately, the list price for the part is just under $220. This would be a nice junkyard find if you can get to it.

by **Gregtrd** » Wed Mar 19, 2008 8:07 pm

badbeaumont wrote:Is the plate a just a plate or do you have to replace the whole erg cooler?

yeah thats the one on that picture.

by **99V6solaraSE** » Wed Mar 19, 2008 10:05 pm

yea itd just be cheaper to just get it fitted on.

by **Gregtrd** » Thu Mar 20, 2008 1:02 pm

99V6solaraSE wrote:yea itd just be cheaper to just get it fitted on.

it might be cheaper to fit it if you cant find one at your local junk yard, i had an auto and manual engine egr cooler and swapped them out so it was free for me and the fit was perfect.

by **badbeaumont** » Thu Mar 20, 2008 6:10 pm

Went to the local pick a part but they didnt have any 1MZs just a couple of 3VZs, just waiting on the strut bar, ill let you guys know how everything goes

by **badbeaumont** » Thu Mar 20, 2008 6:12 pm

Oh, picked up an auto one from Toyota for $100, they happened to have one laying around without a buyer so we cut a deal.

Will an Auto SC work with a manual?

Who is online