[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Fornt hub bearing size 29 or 30mm socket?

SolaraGuy.com

Drive faster, live longer.
http://www.solaraguy.com/

Fornt hub bearing size 29 or 30mm socket?

http://www.solaraguy.com/viewtopic.php?f=21&t=51763

Page 1 of 1

Fornt hub bearing size 29 or 30mm socket?

PostPosted: Mon Jun 13, 2011 11:54 pm
by GNasty
Do I need a 29mm or 30 mm 12 point socket top remove hub nut?
Anyone know what size socket I need will be greatly appreciated
I'm also going to do the cv joints while I do bearings.
New gen solara bearings have to be pressed in with a special bearing press.
--so it looks like i gotta get a rent a car while I work on it.

Re: Fornt hub bearing size 29 or 30mm socket?

PostPosted: Tue Jun 14, 2011 12:39 am
by Gregtrd
Neither one, its 32mm
All times are UTC - 8 hours [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/