How to adjust the aim of the headlight?
Posted:
Sat Sep 10, 2005 9:35 am
by stockae92
How to adjust the aim of the headlight?
anybody tried to adjust the aim of the headlight before?
thanks
Posted:
Sat Sep 10, 2005 11:11 am
by Lone Solara
On the top of the headlight housing there is an adjusting screw right between the high beam and low beam bulbs. The screw adjusts both high and low beams at the same time; it's not possible to adjust them individually.
The adjusting screw is right under the railing that runs over the housing. There is a rubber bump to protect the hood, and right next to it there's a whole in the railing. The adjusting screw is right underneath it. The adjusting screw is like a gear on one side, and on the other side it has a 10mm (I think) head. You can use a screwdriver through the hole, or a socket to adjust the beams.
Posted:
Sat Sep 10, 2005 12:32 pm
by stockae92
cool
thanks
i will try that
Posted:
Wed Nov 16, 2005 9:03 pm
by stockae92
to aim the aim
higher:
face the wind shield from the front of the car, look down to the hole on the cross beam where you can see the *gears*, push it to the
left to aim
high
reverse to aim low
both sides are the same direction to aim high and low