[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - taillight removal
Stock talk about the Generation 2 and 2.5 Toyota Solara which was released in 2004-2007

taillight removal

taillight removal

Postby ndoyank » Mon May 16, 2005 12:52 am

Anyone know how to remove the the back taillights?
Image
18' volks, TRD RSB, TRD FSTB, TRD springs, HID retrofit. Micheal T's Grille ..... Silver ICE
ndoyank
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 58
Joined: Mon Feb 21, 2005 11:44 pm
Location: LA

Postby sorkang724 » Tue May 17, 2005 5:17 pm

looks too hard....
sorkang724
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 218
Joined: Sat Jul 17, 2004 4:52 pm
Location: SoCaL !

Postby Aotoyota » Tue May 17, 2005 7:24 pm

i started but decided not to do it. gotta pull out the seat the unbolt the seats from the frame, then pull the rear pillar,
then then, the sides come off, both sides, where u will need to unbolt the seatbelt too and then the deck comes off after removing the snaps. i didnt think it was worth it in the end...
Alpine + Dynaudio = Sonic bliss.
Aotoyota
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 787
Joined: Thu Sep 23, 2004 10:11 pm
Location: So Cal

Postby Kjk747 » Tue May 17, 2005 7:49 pm

I just broke mine and it's real easy! You have to remove the bolt for the cargo net first, then you open the preforated flap that you will see in the trunk. THere are 2 tabs for the electrical cable and there are 2 nut's you will have to remove below that. Done right? Nope the hardest part is trying to push the tail light out! There is a metal plug like thing that inserts into a plastic adapter in the trunk. You probably should try to push this tab out instead of pulling out the taillight because if your like me I pulled at the corner too much and broke the tail light even more. I did not care as I was replacing it anyway. Insertion is the opposite of removal. Good luck getting it flush again mine is almost at that same point but not exact. Hope that helps. Oh BTY dealer charged me 155.00 with tax for that whole assembly.
Kjk747
Just Licensed SolaraGuy
 
Posts: 11
Joined: Thu Apr 21, 2005 5:12 pm
Location: Buffalo New York

Return to Stock Gen 2 and 2.5

Who is online

Users browsing this forum: No registered users and 3 guests