I was going to attempt to remove the 'SOLARA' and COWBOY emblem, however there are two holes to fill for each emblem. Has any tried a do-it-yourself by using bondo? If so, what type of paint did you use to cover the holes?
I've already spoken with two bodyshops and one is wanting $650, for the entire trunk lid and the other is wanting $450, but he's only doing the bottom of the trunk lid.
They are only covering the 4 holes, they are not shaving the raised COWBOY emblem area.
I'm thinking that this is a too much but I know paint and labor does add up to those two price quotes.
Any feedback would be greatly appreciated.
Thanks,
Michael
I've already spoken with two bodyshops and one is wanting $650, for the entire trunk lid and the other is wanting $450, but he's only doing the bottom of the trunk lid.
They are only covering the 4 holes, they are not shaving the raised COWBOY emblem area.
I'm thinking that this is a too much but I know paint and labor does add up to those two price quotes.
Any feedback would be greatly appreciated.
Thanks,
Michael
Updated 06/01/12: Michael T's
Updated 06/01/12: JUICED! 232whp 294ft/lbs of torque
"Every passing minute is another chance to turn it all around."
Updated 06/01/12: JUICED! 232whp 294ft/lbs of torque
"Every passing minute is another chance to turn it all around."
-
michaels artic frost - SolaraGuy Moderator
- Posts: 3965
- Joined: Wed Feb 25, 2004 11:17 pm
- Location: Kentucky