[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Unable to Reset Maintenance Light
Page 1 of 1

Unable to Reset Maintenance Light

PostPosted: Tue Jul 13, 2010 8:33 am
by Gunga
2006 SLE 30K

Maintenance Light came on at 30K. Have tried the process below 4 times. Did not work. I have reset the light before.
.
Any ideas. BTW; Last Try, Held the trip meter button down for a minute.



Step 1 Turn the key to the 'on' position.

Step 2 Reset both trip meters to zero. you can reset the trip meters to zero by selecting trip A or trip B and holding in the trip meter button for five (5) seconds.

Step 3 After both trip meters are reset, select any trip meter and hold in the trip meter button and start the car.

Step 4 Continue holding the trip meter button until the "maintenance required' light disappears.

Re: Unable to Reset Maintenance Light

PostPosted: Tue Jul 13, 2010 9:05 am
by NightRider
Try resetting the ECU by disconnecting the battery (negative) terminal or removing the fuse.

Re: Unable to Reset Maintenance Light

PostPosted: Wed Jul 14, 2010 6:47 pm
by [SMAN]
Try this. Open your door. Press and hold the odometer rod in. Then turn the key from off to on and watch the display reset.