Re: TLMNICK's Install Tutorial: Install your Own alarm/Start
Hi
My key does not have a chip, I am using the one that I have copied in walmart.
I already have tried that, I left the key in and tried to remote start the car , it gives me the same problem it cranks but it does not start i also tried twisting the key to the right and the alarm shows that the key is in and does not remote start , the parking light flashes 2 times. I also tried unlocking the car by the alarm and leaving the key in ,still it cranks but it doesn't start.
I searched different websites and some people say if the car has the red flashing light , that means it has a immobilizer also there are bypass modules out there that support camry 99 , and maybe it had a chip and the previous owner managed to disable it.
I its strange if the key does not have a chip then how come it doesn't work, I already have check all the wires.
I also used t-taps , I dont know if T-taps could cause the problem , but people who were having the same problem , the needed the by-pass module.
I am going to order this bypass "DEI PKALL Data Transponder Bypass", This supports more than 700 car, it supports from camry 98 to 2011, it also can be updated by usb.
http://www.xpresskit.com/DocumentDownlo ... areid=1636
I was wondering if you could write down the way you used your bypass module and the name of the bypass that you used.
Also the link that you have added does not work http://64.85.6.121/diagrams/printpage.a ... 2&MakeID=2
Thanks
My key does not have a chip, I am using the one that I have copied in walmart.
I already have tried that, I left the key in and tried to remote start the car , it gives me the same problem it cranks but it does not start i also tried twisting the key to the right and the alarm shows that the key is in and does not remote start , the parking light flashes 2 times. I also tried unlocking the car by the alarm and leaving the key in ,still it cranks but it doesn't start.
I searched different websites and some people say if the car has the red flashing light , that means it has a immobilizer also there are bypass modules out there that support camry 99 , and maybe it had a chip and the previous owner managed to disable it.
I its strange if the key does not have a chip then how come it doesn't work, I already have check all the wires.
I also used t-taps , I dont know if T-taps could cause the problem , but people who were having the same problem , the needed the by-pass module.
I am going to order this bypass "DEI PKALL Data Transponder Bypass", This supports more than 700 car, it supports from camry 98 to 2011, it also can be updated by usb.
http://www.xpresskit.com/DocumentDownlo ... areid=1636
I was wondering if you could write down the way you used your bypass module and the name of the bypass that you used.
Also the link that you have added does not work http://64.85.6.121/diagrams/printpage.a ... 2&MakeID=2
Thanks
- installerman2011
- Just Licensed SolaraGuy
- Posts: 3
- Joined: Wed Dec 07, 2011 11:33 pm