[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - replacement bushings for TRD RSB
Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.

replacement bushings for TRD RSB

replacement bushings for TRD RSB

Postby Akfahad » Sat Oct 04, 2008 1:45 pm

Well, found out what my clunking was....my bushings on both sides of the TRD RSB are cracked. Put some WD-40 on there for the time being until I can get some new bushings. BUT...where do you guys know of that I can get some replacement bushings?

Also, anybody know the difference in size between the stock RSB and the TRD RSB. I know the TRD RSB is 3/4" in diameter. (19mm)
Last edited by Akfahad on Sun Oct 05, 2008 10:29 am, edited 1 time in total.
User avatar
Akfahad
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2738
Joined: Tue Jan 28, 2003 9:13 am
Location: NJ

Postby ASG14 » Sat Oct 04, 2008 11:01 pm

Drop Dawgz a PM. He may be able to help.
Image
ASG14
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1632
Joined: Mon Apr 10, 2006 3:02 pm
Location: Stamford Connecticut

Postby Midias » Sat Oct 04, 2008 11:40 pm

Autozone sells universal bushings and holders that fit our cars in red poly. You just need to measure the bar. I think they are about $20 for both.
User avatar
Midias
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3550
Joined: Sun Jul 18, 2004 8:06 pm
Location: Rochester NY

Postby Dawgz » Sun Oct 05, 2008 6:53 pm

I can get original TRD bushings for the sway bar.

Hit me up if u want it.
--=Black on Black=-- (Sold)
User avatar
Dawgz
SolaraGuy Professional Racer
SolaraGuy Professional Racer
 
Posts: 4678
Joined: Fri Jul 16, 2004 2:28 pm

Postby Akfahad » Sun Oct 05, 2008 8:08 pm

^^sent
User avatar
Akfahad
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2738
Joined: Tue Jan 28, 2003 9:13 am
Location: NJ

Postby Akfahad » Sun Oct 12, 2008 12:53 pm

FYI...got the new bushing from Mark at Hotchkis Peformance (thanks Ryan). His number 562.907.7757. The part # for the busings is 22793RB, although he did not have them anymore so he sent me another similar kind, #5335G (3/4" bushing). They're the "D" style you need and black in color, but they're little taller than the one's you get with the TRD RSB, so some extra "force" is needed and I ended up using two longer bolts (M8x1.25), one on each side in order for it to fit. Hope this helps others in the future.
User avatar
Akfahad
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2738
Joined: Tue Jan 28, 2003 9:13 am
Location: NJ

Postby dvdchris45 » Sun Oct 12, 2008 12:55 pm

would these bushings apply to the gen 2 rsb as well?
<b>04 Desert Sand V6</b>
<i>Injen + Magnaflow </i>
<i>TRD FSTB + RSB</i>
<i>HID + A/V + iPod</i>
User avatar
dvdchris45
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1690
Joined: Mon Jul 12, 2004 4:49 pm
Location: Valley Glen, CA

Postby Akfahad » Sun Oct 12, 2008 3:40 pm

maybe...as long as the diameter of the bar didn't change.
User avatar
Akfahad
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2738
Joined: Tue Jan 28, 2003 9:13 am
Location: NJ

Re: replacement bushings for TRD RSB

Postby corlon » Fri Jul 19, 2013 10:00 pm

ok. so I need to replace my 1999 solara trd rear sway bar bushings. I ordered the 22793rb from hotchkis. went to put them in and they are way too small. they are just a round style bushing, not the bigger d style. here is a picture of the hotchkis bushing in the package next to the trd bushing removed from the vehicle. by the way, the guy at hotchkis said they made the trd sway bars for this vehicle. has anyone had any luck replacing these bushings? were you able to make the 22793rb work somehow?

Image
NiCe
User avatar
corlon
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 788
Joined: Mon Nov 26, 2007 11:26 pm
Location: midwest

Re: replacement bushings for TRD RSB

Postby HARKEM » Sat Jul 20, 2013 9:20 am

You could try the Whitline one to suit there swaybar, tho they don't list them on there website, so you have to find a dealer in your area..
http://www.whiteline.com.au/product_det ... mber=BTR39
it might be the service kit listed: KSK083-20

or quick search on ebay, these suit an 18mm bar and they are cheap and polyeurathane..
http://www.ebay.com.au/itm/Energy-Suspe ... 203&_uhb=1
2001 V6 CAMRY TOURING
DBA 4000 Slotted/Cross Drilled Rotors Front/Rear, EXEDY Stage 1 Race Clutch, FIDANZA 9lbs Flywheel,
Whiteline RSB & FSB, TRD Suspension, CUSTOM Headers&OBX CatBack, TRD S/C:)
HARKEM
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 102
Joined: Fri May 27, 2011 4:16 pm
Location: Melbourne

Re: replacement bushings for TRD RSB

Postby corlon » Wed Jul 24, 2013 1:26 pm

nope. the 1st # listed is for a 20mm bar the 2nd is for a 18mm bar. the trd bar is 19mm.
NiCe
User avatar
corlon
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 788
Joined: Mon Nov 26, 2007 11:26 pm
Location: midwest

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 14 guests