Fog Light housing, taking off the lense...

[Dawgz]

Baking them @ 230 Degrees for 5 mins should do the trick right? I want to take off the lense to "retro" fit the Lexus Yellow Capsules...



These fog lights were a bitch to take off, they are only held on by two bolts tho...one of them is a 8mm but u need a long 8mm socket for this, and the other is i think a 6mm or 7mm, i used my robogrip for that one tho.

[Ruski]

There both 8mm. but it is a pain in the ass to remove them its a tight fit . but 230 should be fine

[nemoxfishy]

post pics! i wonna mod my fogs too...!! the stock lense look....

[BLkLaBelSolora]

make sure u constantly check it with in 5 min, i melted my lens. lol

[Dawgz]

Did them, it took 12mins in 250Degrees, checking up every 4 mins.


Prying, putting it back in the oven, prying...finally got it off.

[Dawgz]

For pics...


http://www.solaraguy.org/viewtopic.php?p=425614#425614

[CamryOnBronze]

i found water in one of mine this summer... I think whoever had the car before me cracked them open. Make sure you seal them like crazy or they will get water in them and look like crap...