Limited V6 Exhaust Ypipe 1MZ *Update-Back 1 last time*

[DatSRBoi]

And last post of the day haha. Time is ticking and I know allot of people and Anxious since they sent me their money to get it done. Pipe should be shipped out sometime last week of November into VERY early December depending on traffic we get when it comes in. I promise you all will recieve the pipe at top quality and you will be happy on time for cold weather WOT.

Other then that Ill check up on this post again in like.... 10 hours maybe. Got a 10 page paper due in 3 hours and Im doing this at school.

[CASTRO]

^stop posting/talking on AIM and do you paper! hahaha

Yessss.... First thing I'm gonna do when I get my pipe installed is.... Race Santa and his damn Deer. I hear the one with a red nose is a Type-R...

Crap... okay okay, I think its REALLY time for me to leave and install my brakes. lol

[DatSRBoi]

1. CASTRO-----------------Paid W/mid pipe
2. Akfahad-----------------Paid w/ mid pipe
3:funboy102 (Henry)----Paid w/Mid pipe
4. danwags999-------------Paid w/mid pipe
5. Facevedo17 ( Cisco)---Paid w/ Mid pipe
6.Midias (Corey)---------Paid w/ mid pipe
7. 20SoLaRa02------------Paid w/ mid pipe
8. NRDriver---------------Paid w/Mid pipe
9. hskrsolara--------------Paid w/ Mid pipe
10. Noel de Guzman (TN)- Paid W/ Mid Pipe
11.Mcthings (Matt)
12.
13.

[DatSRBoi]

Down to two : Three including a one hold because Ive talked to him before so know he's going to pay.

[Too Bzy]

Had one more question that didn't get answered...One more question please...If the headers ever come out or if you have like the JPP's could you still use this? Or is this a cheaper way of having less restriction without buying headers?

[facevedo17]

If im wrong someone correct me but I believe Dats Y pipe is meant to be bolt on to our stock headers , I don't know how the Jpp headers look so not sure if they would bolt right up aswell but with this Pipe u don't need Jpp headers ...Dats Dyno has pretty good numbers ...if not just PM him im sure he is done with his Paper

[DatSRBoi]

Had one more question that didn't get answered...One more question please...If the headers ever come out or if you have like the JPP's could you still use this? Or is this a cheaper way of having less restriction without buying headers?

If I ever do make my own headers it will fit. Im not wasting a Y pipe that I paid almost 500 bucks to waste . The JP wont fit. Theirs run longer before meeting. Mine will more be like turbo style headers where all the pipes will run up before downward to give them equal lenth there.

I will post a dyno sheet. They arnt accurate but I'll explain it later.

[DatSRBoi]

Please understand that there are allot of error that can happen on the dyno. In this sheet was a before and after of the Y pipe WITH slight SAFC2 calibrating. Just a rough estimate what it can give you. ALL cars are different. This happens to be mine. If you think Im bs'ing look at the TQ, with even the gains the car was flowing so easily to give any TQ
(I had to run a before that day because we were afraid of running too lean to pop the motor. Im not dumb to straight up run a car with a new mod without running richer. Although both dyno was in the mid 12- low/mid 13 A/F)

I have another sheet with more to it but I cant find it. It had an extra 5whp added to it due to bigger injectors added... Injectors dont add HP.. SAFC timing did. So theres allot of margins in there.

[DatSRBoi]

Hope that helped some of you guys. I had to literally dig through my crap to find just that one. I have an older onw ith no Y pipe on it if you guys want to see that one too

[DatSRBoi]

URD 02 SIMULATOR LINK


Link to an 02 Simulator by URD that a few member on this forum has used before. Maybe Castro can steer you guys to the specific one he used and how to install it.

I paid 2 times that much for mine and I got RIPPED OFF. Hope this link helps a few people here.[/img]

[CASTRO]

^
hey! thats the O2 sim i bought! Yeah, they dont list the right install diagram. When I followed it exactly, it made me tap the front O2 simulator instead which gave me a CEL. I did it the right way and went to Toyota Parts dept. and got a complete wiring diagram which I traced and found the right wire to cut myself. It is true that you can find a different/cheaper simulator, but I installed the one Dat posted above and it works just fine. hey... you even get a URD sticker. lol

BTW, in a PM to facevedo17, I stated that URD doesnt list it for our setup. Just order it as the only difference it makes it the wiring diagram/install they send with it. It will work no worries. The O2 sim can work inside or outside of the car. I chose to put mine right next to the ECU so its safe and out of sight.

[Mcthings]

Good News!

I have the funds. I just need to get Paypal to work with this new credit card.

Should work tomorrow, and I'll send the money then. I'll keep you updated. But now it's only a matter of getting Paypal to get in sync with my new card.

[DatSRBoi]

Good News!

I have the funds. I just need to get Paypal to work with this new credit card.

Should work tomorrow, and I'll send the money then. I'll keep you updated. But now it's only a matter of getting Paypal to get in sync with my new card.

Nice Nice still got your pipe spot saved for you.. Guess its going to be sold out so fast that no one else will get it .

[QuickSEV6]

Dat,
Your signature boasts of having 300hp. The before and after of this mod only shows 233 and 242. Did you remove the supercharger or something?

[Mcthings]

PAYMENT SENT!!!!!