[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - Built 1mz update, its almost done.

Skip to content

Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.
Post a reply

Built 1mz update, its almost done.

Postby Dawgz » Sat Apr 16, 2005 8:11 pm

time for someone to invest in lsd...
--=Black on Black=-- (Sold)
User avatar
Dawgz
SolaraGuy Professional Racer
SolaraGuy Professional Racer
 
Posts: 4678
Joined: Fri Jul 16, 2004 2:28 pm
Top

Postby Dawgz » Sat Apr 16, 2005 10:33 pm

nvm i saw the lsd just now as u pmed me... :-? my bad...nice build up tho! post pics when ur done itll look sweeeeeeeet
--=Black on Black=-- (Sold)
User avatar
Dawgz
SolaraGuy Professional Racer
SolaraGuy Professional Racer
 
Posts: 4678
Joined: Fri Jul 16, 2004 2:28 pm
Top

Postby that1mexguy » Sun Apr 17, 2005 5:20 am

daaaaaaaaang, that sounds sweeeeeet!!! and i was getting all excited about my SC ... you guys are making me feel i'm still stock LOL
that1mexguy
SolaraGuy Supporter
SolaraGuy Supporter
 
Posts: 2454
Joined: Fri Nov 01, 2002 4:44 pm
Location: Atl, GA
Top

Postby Fletch » Sun Apr 17, 2005 7:31 am

Blowing the stock motor may have been the best thing that happened to you...

Your old #'s were impressive, can't wait to see the new #'s.
2006 Legacy GT spec.B

(Totaled) '99 SE V6, TRD S/C, 5.5 psi Pulley, Jim's Fuel Upgrade, TRD Shortshifter, SPEC Stage 3 Clutch, Lightweight Flywheel, Tokico / Eibach, TRD RSB, 2.5" Custom Y-Pipe, Greddy Cat-Back
Fletch
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 693
Joined: Wed May 14, 2003 1:03 pm
Location: South Bend, Indiana
Top

Postby trdkamuri51o » Sun Apr 17, 2005 10:29 am

now get us some pics of this setup :lol:
need wheels? www.memoryfab.com - ask for david

-1JZ Bozo Camry = Cooler than Penguin crap in January on the face of Pluto.
trdkamuri51o
SolaraGuy Professional Racer
SolaraGuy Professional Racer
 
Posts: 4227
Joined: Sun Apr 11, 2004 10:11 am
Location: Hayward, bay area
Top

Postby Mandarinsolara » Sun Apr 17, 2005 11:47 pm

that tranny is in for it :(
Mandarinsolara
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1351
Joined: Thu Oct 14, 2004 1:41 pm
Location: Jacksonville, FL
Top

Postby MuShRoOmFaCe » Mon Apr 18, 2005 6:27 am

simply amazing
MuShRoOmFaCe
Just Licensed SolaraGuy
 
Posts: 26
Joined: Thu Apr 07, 2005 9:37 am
Location: Norman, OK
Top

Postby returnofthedack » Mon Apr 18, 2005 10:08 am

this same set up could fit in the solara engine bay right? the reason i ask, is i admire it very much, and imitation is the highest form of flattery haha
www.seandackermann.com

The only person that can stop you in life, is yourself
returnofthedack
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 625
Joined: Tue Sep 28, 2004 9:59 am
Location: maryland
Top

Postby impactX » Sun Apr 24, 2005 1:34 am

3S-GTE
impactX
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 958
Joined: Thu Nov 21, 2002 9:06 pm
Top

Postby DaTwUnKrAziEpInOy » Sun Apr 24, 2005 2:54 am

:o da**.....that's hecka work, where can I get the low comp pistons from anyway and most of the internals ???
DaTwUnKrAziEpInOy
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 731
Joined: Tue Apr 05, 2005 11:32 pm
Location: Salinas CA
Top

Postby JoeB » Sun Apr 24, 2005 8:02 am

DaTwUnKrAziEpInOy wrote::o da**.....that's hecka work, where can I get the low comp pistons from anyway and most of the internals ???

You can get them the same place Gabe and I got ours, Stoid Racing. You can find the link to their site on my CarDomain page. You'll DEFINITELY want to get the Eagle rods to go along with the Arias 9.0:1 forged pistons. -JoeB
Please stop by and rate my ride.
http://www.cardomain.com/id/jbailer
Image
JoeB
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1166
Joined: Wed Apr 24, 2002 6:58 pm
Location: Myersville, MD
Top

Postby DaTwUnKrAziEpInOy » Sun Apr 24, 2005 12:28 pm

Yeah fo' sho.....thanks for the info... keep up good work !!
DaTwUnKrAziEpInOy
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 731
Joined: Tue Apr 05, 2005 11:32 pm
Location: Salinas CA
Top
Previous
Post a reply

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: Google [Bot] and 10 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net