[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - ECU pin out ""MAKE STICKY""
Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.

ECU pin out ""MAKE STICKY""

ECU pin out ""MAKE STICKY""

Postby DaveSolara » Sat Nov 28, 2009 7:39 pm

Moderator please make this a sticky...
This should make things easier for everyone who needs this. I am not sure as to why this hasn't been put on here yet. It has taken me hours and hours to read and understand the shop manual wiring diagram to get this right. No need for everyone else to have to go thru this. Use this for the 1st gen Solara and Camry of the same years. A simple thanks to me will do!
V6 1mzfe 5sp & auto

Apex RSM - ECU pin outs you will need:
Red wire = pin 16 (top plug - 22P) = Battery (B+) = IG Power
Black/orange wire = pin 27 (2nd plug dwn - 28P) = Tach/RPM
Purple/white wire = pin 22 (2nd plug dwn - 28P) = Speed sensor
Brown wire = pin 17 (4th plug dwn - 24P) = ECU Ground


(or follow T-10d instructions on Apex website - diagram 2)

Wide band Air fuel ratio or air/fuel gauge - ECU pin outs you will need:
pin 11 (4th plug dwn - 24P) = AFR+ input signal for automatic cars

Wide band signal for the manual:
Black wire = pin 8 (2nd plug dwn - 28P) = 02 sensor input
Last edited by DaveSolara on Sun Nov 29, 2009 3:15 pm, edited 2 times in total.
2000 1/2 Solara V6 1mz 5sp
t3/t4 turbo
User avatar
DaveSolara
Just Licensed SolaraGuy
 
Posts: 41
Joined: Wed Oct 07, 2009 8:13 pm
Location: Sunset Beach, NC

Postby SleeperSolara » Sun Nov 29, 2009 12:36 pm

Thanks for the good information man.

You got a picture just for reference.
I'll check the plugs later when it gets warmer.....
2000 Solara SE auto V6. Diamond White Pearl.
Top Speed Run finished at 130 mph. :o
Too many modifcations for the signature.
User avatar
SleeperSolara
SolaraGuy Hall of Famer
SolaraGuy Hall of Famer
 
Posts: 9257
Joined: Tue Jun 15, 2004 11:38 am
Location: The 405

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 30 guests